RSO Firearm and Ammunition Identification

Question 1

Which ammunition type is most commonly prohibited on indoor ranges due to the risk of ricochets and range surface damage?

Accepted Answer

Steel-core or armor-piercing (AP) rounds

Answer

Steel-core and armor-piercing rounds are prohibited on most indoor ranges because their hardened cores can penetrate or ricochet off steel backstops and baffles, creating serious injury hazards. FMJ lead-core, hollow-point, and lead round-nose rounds are far more commonly permitted.

Question 2

A shooter arrives with a firearm that has an external hammer, a rotating cylinder, and no detachable magazine. What type of action is this?

Accepted Answer

Single-action revolver or double-action revolver

Answer

A rotating cylinder that holds cartridges and the absence of a detachable magazine are the defining features of a revolver. The presence of an external hammer indicates it could be single-action or double-action. An RSO must recognize this to apply the correct administrative handling and unloading procedures.

Question 3

What is the primary visual difference between a rimfire cartridge and a centerfire cartridge?

Accepted Answer

Rimfire cartridges have the priming compound in the rim of the case; centerfire cartridges have a primer cup in the center of the base

Answer

The key structural difference is primer placement. Rimfire cartridges (e.g., .22 LR) contain priming compound distributed around the inside of the rim. Centerfire cartridges (e.g., 9mm, .45 ACP) have a replaceable primer cup centered in the base. This distinction matters for identifying ammunition and understanding reload policies.

Question 4

A shooter presents a box labeled '12 Gauge 2¾" #8 Shot.' What does the '2¾"' measurement refer to?

Accepted Answer

The chamber length the shotshell is designed for

Answer

The 2¾" refers to the length of the fired (opened) shotshell case, which corresponds to the minimum chamber length required to safely fire it. Loading a 3" shell into a 2¾" chambered shotgun is dangerous. RSOs must understand this to prevent shooters from using shells that exceed their firearm's chamber specification.

Question 5

Tracer ammunition is generally banned on most civilian ranges primarily because:

Accepted Answer

The incendiary compound in tracer rounds creates a fire hazard, especially on ranges with dry vegetation or flammable backstop materials

Answer

Tracer rounds contain a pyrotechnic compound that burns to mark the bullet's path. This burning compound can ignite dry grass, wood, or other flammable materials on or behind a range. The fire hazard — not legality or accuracy — is the primary reason most ranges prohibit them.

(RSO) Certified Range Safety Officer Practice Test

(RSO) Certified Range Safety Officer Practice Test

RSO Firearm and Ammunition Identification