Blueprint Reading & Technical Drawings Flashcards
7 cards from real RRT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Blueprint Reading & Technical Drawings flashcards as text
On a floor plan drawn at 1/4" = 1'-0", a room measures 3 inches long on the drawing. What is its actual length?
Answer: 12 feet
Each 1/4 inch equals one foot, so 3 inches contains 12 quarter-inches, or 12 feet.
A plan dimension reads 14'-6". How many total inches is that?
Answer: 174 inches
14 feet × 12 inches = 168 inches, plus 6 inches = 174 inches.
At a scale of 1/8" = 1'-0", a wall measures 2-1/2 inches on the drawing. How long is the actual wall?
Answer: 20 feet
2.5 inches contains 20 eighth-inch units, and each unit is one foot.
What do short, evenly spaced dashed lines usually represent on a technical drawing?
Answer: Hidden edges or objects not directly visible
Hidden lines show edges that are behind or beneath other surfaces in that view.
A room on the plan is dimensioned 12'-0" x 15'-0". How many square yards of floor area does it contain?
Answer: 20 square yards
12 × 15 = 180 square feet, and 180 ÷ 9 = 20 square yards.
Which type of scale is designed for reading building floor plans marked in fractions of an inch per foot?
Answer: Architect's scale
The architect's scale is graduated in ratios such as 1/8", 1/4", and 1/2" per foot used on building plans.
A line made of alternating long and short dashes on a drawing typically indicates what?
Answer: A centerline
Centerlines use a long-short-long dash pattern to mark the center of symmetrical features.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- iicrc.org — Test delivery, eligibility, fees, renewal, score release, test dates, retake fee, retake policy, passing score · verified Nov 2026