Weld Quality Control Flashcards
6 cards from real 456A practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Weld Quality Control flashcards as text
What is ultrasonic testing (UT) and what are its advantages over radiographic testing?
Answer: A method using high-frequency sound waves to detect internal discontinuities; advantages include immediate results, no radiation hazard, ability to detect planar defects (cracks, lack of fusion), and portability
UT sends high-frequency sound waves through the weld using a transducer. Internal discontinuities reflect the sound back, and their location, size, and orientation can be determined. Advantages over RT include: no radiation hazard, immediate results, superior detection of planar defects (cracks, lack of fusion), portability, and ability to inspect thick sections.
What is magnetic particle testing (MT/MPI) and what type of discontinuities does it detect?
Answer: Applying magnetic particles to a magnetized workpiece to detect surface and near-surface discontinuities such as cracks, incomplete fusion, and porosity in ferromagnetic materials
Magnetic particle inspection (MPI) magnetizes the test area and applies iron particles (dry or in a liquid suspension). Discontinuities at or near the surface disrupt the magnetic field, attracting and holding particles in visible patterns (indications). It detects surface and near-surface cracks, lack of fusion, and similar discontinuities in ferromagnetic materials only.
What is a welder qualification test under CSA W47.1?
Answer: A practical test where a welder produces test welds on a specific joint configuration, position, and process; the welds are then tested (bend, RT, or UT) to verify the welder can produce acceptable quality
Under CSA W47.1, welder qualification requires producing test weld coupons using the specific process, position, and joint type being qualified. Test specimens are cut from the coupon and subjected to guided bend tests, RT, or UT to verify they meet acceptance criteria. Qualification is valid for a specific process, position range, and material thickness range.
What is dye penetrant testing (PT/LPI) and when is it used?
Answer: Applying a visible or fluorescent dye to detect surface-breaking discontinuities by capillary action; used on non-ferromagnetic materials and when MPI cannot be used
Liquid penetrant inspection (LPI/PT) applies a dye (visible red or fluorescent) to the surface, which is drawn into surface-breaking discontinuities by capillary action. After removing excess penetrant and applying a developer, the dye bleeds back out of flaws, making them visible. It works on any non-porous material, including non-ferromagnetic metals where MPI cannot be used.
What is the acceptance criteria for undercut in a structural fillet weld according to CSA W59?
Answer: Maximum 1 mm (1/32 in.) depth for statically loaded structures; more restrictive limits apply to dynamically (cyclically) loaded structures and critical connections
CSA W59 limits undercut depth based on loading type and member category. For statically loaded structures, undercut generally must not exceed 1 mm (1/32 in.) depth. For cyclically loaded (fatigue-sensitive) structures, limits are more restrictive and may be as low as 0.25 mm (0.01 in.). Undercut creates stress concentrations that reduce fatigue life.
What documentation must accompany a completed structural weld per CSA W47.1 and W59?
Answer: Welder identification/qualification records, WPS used, NDE reports, material test reports (MTRs), fit-up inspection records, and any non-conformance reports
Complete weld documentation under CSA W47.1/W59 includes: welder identification marks and qualification records (valid for the process/position), the WPS number and parameters used, all NDE reports (VT, RT, UT, MT, PT as required), base and filler material certifications (MTRs), fit-up and preheat inspection records, and any non-conformance/repair documentation.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- red-seal.ca — Exam format, exam information · verified Nov 2026
- skilledtradesontario.ca — Passing score, score release, time limit, renewal, score validity, eligibility, retake fee, test delivery, fees, retake policy · verified Nov 2026