SMAW Stick Flashcards
6 cards from real 456A practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 SMAW Stick flashcards as text
What does the 'E7018' electrode designation mean according to CSA/AWS classification?
Answer: E = electrode, 70 = minimum tensile strength (70,000 psi / 480 MPa), 1 = all-position capability, 8 = low-hydrogen iron powder coating with AC/DCEP
In the AWS/CSA designation: E = electrode, 70 = minimum tensile strength in ksi (70,000 psi or 480 MPa), 1 = usable in all positions (flat, horizontal, vertical, overhead), 8 = low-hydrogen iron powder coating suitable for AC and DCEP. The E7018 is the most widely used structural electrode in Canadian construction.
What is the purpose of the flux coating on a SMAW electrode?
Answer: To shield the weld pool from atmospheric contamination, stabilize the arc, add alloying elements, and form a protective slag over the cooling weld
The flux coating serves multiple critical functions: it decomposes in the arc to create a shielding gas that protects the molten weld pool from nitrogen and oxygen contamination, forms a slag that protects the cooling weld, stabilizes the arc, adds deoxidizers and alloying elements, and controls the weld bead profile.
Why must low-hydrogen electrodes (E7018) be stored in a heated oven or opened from vacuum-sealed packaging?
Answer: To prevent moisture absorption by the flux coating, which can introduce hydrogen into the weld and cause hydrogen-induced cracking
Low-hydrogen electrode coatings readily absorb atmospheric moisture. If used wet, the moisture decomposes in the arc, introducing hydrogen into the weld. Dissolved hydrogen can cause delayed cracking (hydrogen-induced cracking or cold cracking) in the heat-affected zone. CSA W59 requires storage at 120°C to 150°C in a rod oven after opening.
What polarity is typically used for E7018 electrodes and why?
Answer: DCEP (DC Electrode Positive / Reverse Polarity) for deeper penetration and a smoother, more stable arc; AC is also acceptable
E7018 electrodes perform best on DCEP (reverse polarity) where the electrode is positive and the workpiece is negative. DCEP concentrates about two-thirds of the arc heat at the electrode tip, promoting deeper penetration and better arc characteristics. E7018 is also designed to run on AC, making it versatile for field conditions.
What is arc blow in SMAW welding and how can it be corrected?
Answer: An uncontrolled deflection of the welding arc caused by magnetic fields; corrected by changing ground clamp position, welding toward the ground, using shorter arc length, or switching to AC
Arc blow is the deflection of the welding arc by magnetic fields created by the DC welding current flowing through the workpiece. Corrections include: repositioning the work lead (ground clamp), welding toward the ground connection, using a shorter arc length, wrapping the work lead around the workpiece, or switching from DC to AC power.
What is the correct technique for striking an arc with a SMAW electrode?
Answer: Use either a scratching motion (like striking a match) or a tapping motion, then establish the correct arc length
Two common arc-striking techniques are: the scratch method (drag the electrode tip across the workpiece in a scratching motion, then lift to establish arc length) and the tap method (touch the electrode tip lightly to the workpiece and quickly lift). Both establish the arc, which is then maintained at the correct arc length (approximately equal to the electrode core wire diameter).
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- red-seal.ca — Exam format, exam information · verified Nov 2026
- skilledtradesontario.ca — Passing score, score release, time limit, renewal, score validity, eligibility, retake fee, test delivery, fees, retake policy · verified Nov 2026