← All 456A Flashcard Decks

Metallurgy & Heat Treatment Flashcards

6 cards from real 456A practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Metallurgy & Heat Treatment flashcards as text
  1. What is the purpose of 'solution annealing' (solution heat treatment) for austenitic stainless steel after welding?

    Answer: Dissolves carbide precipitates back into solid solution and eliminates sensitization, restoring full corrosion resistance

    Solution annealing heats austenitic stainless steel above 1040°C to dissolve all carbide precipitates back into solid solution. Rapid quenching prevents re-precipitation on cooling. This fully eliminates sensitization (caused by HAZ carbide precipitation during welding) and restores the material's corrosion resistance. It is required when welding sensitization-sensitive grades in corrosive service.

  2. What is 'weld metal hot cracking' susceptibility index (HCS) and what composition produces high HCS?

    Answer: HCS = (C + S/2 + P/2 + Si/25 + Ni/100) / (3Mn + Cr + Mo + V + 1.5Ti + 0.5Nb) × 1000; high C, S, P, and Ni with low Mn produce high HCS

    The Malinovskiy hot cracking susceptibility index combines the effects of elements that promote hot cracking (C, S, P form low-melting films; Si and Ni extend the solidification range) against those that suppress it (Mn ties up sulfur as high-melting MnS; Cr, Mo, V, Ti, Nb reduce segregation). Higher values indicate greater risk of solidification cracking.

  3. What is 'precipitation hardening' (PH) stainless steel and why does it present challenges for welding repair?

    Answer: Stainless steel strengthened by forming fine precipitates (e.g., Ni3Al, Ni3Ti) during aging heat treatment; welding dissolves these precipitates in the HAZ, requiring re-aging after welding to restore full strength

    PH stainless steels (e.g., 17-4 PH, 15-5 PH) achieve high strength through fine intermetallic precipitates formed by an aging heat treatment. Welding heat dissolves these precipitates in the HAZ, creating a soft zone. After welding, the component must be solution annealed and re-aged to restore the full precipitation hardened strength. This requires careful scheduling and furnace capacity.

  4. What does 'embrittlement' mean in the context of weld metal or HAZ at low temperatures?

    Answer: A shift in the ductile-to-brittle transition temperature to higher values, increasing the risk of brittle fracture at service temperatures

    Embrittlement refers to a shift in the ductile-to-brittle transition temperature (DBTT) to higher values, meaning the material fractures in a brittle manner at higher (less cold) temperatures. Causes include hydrogen embrittlement, strain aging embrittlement (nitrogen), temper embrittlement (P, Sb, Sn at grain boundaries), and 475°C embrittlement in ferritic stainless steels. Low Charpy impact values at design temperature indicate an embrittled condition.

  5. What is the 'P-number' system used for in welding procedure qualification under ASME/CSA standards?

    Answer: Groups base metals with similar weldability and metallurgical characteristics to reduce the number of procedure qualifications required

    P-numbers group base materials by chemical composition and mechanical properties for qualification purposes. Qualifying a procedure with one material in a P-number group typically qualifies it for welding all materials within that group, reducing the total number of qualification tests. Carbon steels are P1, low-alloy steels are P3-P5, austenitic stainless steels are P8, etc.

  6. What is the effect of 'niobium (columbium) additions' to microalloyed HSLA steels on weldability?

    Answer: Niobium refines grain size during controlled rolling but increases HAZ hardenability and CE, requiring controlled heat input and preheat to avoid HAZ embrittlement

    Niobium (Nb) in HSLA steels refines austenite grain size during thermomechanical rolling, improving base metal toughness. However, Nb increases the HAZ hardenability index and contributes to CE. In the coarse-grained HAZ, Nb also promotes precipitation hardening during tempering (reheat cracking risk). Welding procedures must control heat input to avoid oversizing the coarse-grained HAZ.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. red-seal.ca — Exam format, exam information · verified Nov 2026
  2. skilledtradesontario.ca — Passing score, score release, time limit, renewal, score validity, eligibility, retake fee, test delivery, fees, retake policy · verified Nov 2026