Piping and Plumbing Flashcards
7 cards from real Ramsay Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Piping and Plumbing flashcards as text
What is the main purpose of a P-trap under a sink?
Answer: Hold a water seal that blocks sewer gases
The water held in the trap's bend keeps sewer gas from entering the building.
Why do drainage systems need vent pipes?
Answer: To let air in so traps are not siphoned dry
Vents balance air pressure in the drainage system so trap seals are not pulled out.
What is the typical minimum slope for a horizontal drain pipe 3 inches or smaller in diameter?
Answer: 1/4 inch per foot
Plumbing codes generally require 1/4 inch per foot for small drains so waste and water flow together.
What is the purpose of a cleanout in a drainage line?
Answer: Gives access for clearing blockages
Cleanouts are removable plugs that let a technician run a snake or auger into the line.
Wastewater from sinks, showers, and washing machines (not toilets) is called:
Answer: Gray water
Gray water is lightly used water that contains no toilet waste.
An air gap at a dishwasher or sink drain is used to:
Answer: Prevent wastewater from siphoning back into the fixture or supply
An air gap is an open vertical space that physically stops backflow from reaching the clean side.
Which fitting is typically used to connect a horizontal branch drain to a vertical stack?
Answer: Sanitary tee
A sanitary tee has a curved inlet that guides waste smoothly downward into the vertical stack.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- ramsaycorp.com — Test delivery, fees, exam format, time limit, score validity · verified Oct 2026