← All Ramsay Test Flashcard Decks

Piping and Plumbing Flashcards

7 cards from real Ramsay Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Piping and Plumbing flashcards as text
  1. Which fitting joins two pipes of different diameters in a straight line?

    Answer: Reducer

    A reducer (reducing coupling) connects a larger pipe to a smaller one along the same axis.

  2. What is the main advantage of installing a union in a threaded pipe run?

    Answer: It allows the pipe to be disconnected without cutting or unscrewing the whole run

    A union has a center nut that lets a section be removed for service without rotating the connected pipes.

  3. Standard NPT pipe threads taper at what rate?

    Answer: 1/16 inch per inch of length

    NPT threads taper 1/16 inch in diameter per inch of length (3/4 inch per foot), which creates a tight seal as they are tightened.

  4. Which tool gives the cleanest, square cut on copper tubing?

    Answer: Tubing cutter

    A tubing cutter's rotating wheel produces a square cut with little burr, which suits soldered joints.

  5. When connecting copper pipe to galvanized steel pipe, which fitting should be used to prevent galvanic corrosion?

    Answer: Dielectric union

    A dielectric union electrically isolates dissimilar metals to stop galvanic corrosion.

  6. In which direction should PTFE (Teflon) tape be wrapped on male pipe threads, viewed from the open end?

    Answer: Clockwise

    Wrapping clockwise, the same direction the fitting turns to tighten, keeps the tape from unraveling during assembly.

  7. Compared with Schedule 40 pipe of the same nominal size, Schedule 80 pipe has:

    Answer: A thicker wall and smaller inside diameter

    Both schedules share the same outside diameter, so Schedule 80's thicker wall reduces the inside diameter.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ramsaycorp.com — Test delivery, fees, exam format, time limit, score validity · verified Oct 2026