Practice Test GeeksQEI - Qualified Elevator Inspector Practice Test
← All QEI Flashcard Decks

Accessibility, LULA, and Special Installations Flashcards

6 cards from real QEI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Accessibility, LULA, and Special Installations flashcards as text

  1. What is the maximum rated capacity for a LULA elevator under ASME A17.1?

    Answer: 1,400 lbs

    ASME A17.1 limits LULA elevator rated load capacity to a maximum of 1,400 pounds.

  2. When inspecting a platform lift (vertical wheelchair lift) under ASME A18.1, what safety device must be present to prevent the platform from descending if a person or object is in the path below?

    Answer: A sensing device or guard under the platform

    ASME A18.1 requires a sensing device or protective guard beneath the platform to detect obstructions and prevent the lift from crushing anyone below.

  3. Which standard governs the installation and inspection of vertical platform lifts and inclined platform lifts in the US?

    Answer: ASME A18.1

    ASME A18.1 (Safety Standard for Platform Lifts and Stairway Chairlifts) governs the design, installation, and inspection of vertical and inclined platform lifts.

  4. What door timing requirement does ADA set for elevator doors to remain open long enough for a person using a wheelchair to enter?

    Answer: Doors must remain fully open for a minimum of 3 seconds

    ADA Standards require elevator doors to remain fully open for a minimum of 3 seconds to allow adequate boarding time for wheelchair users and people with mobility impairments.

  5. What is the required mounting height range for elevator control buttons per ADA Standards for side-reach approach?

    Answer: 15 to 48 inches above the floor

    ADA Standards require operable controls, including elevator buttons, to be mounted between 15 and 48 inches above the floor for side-reach accessibility.

  6. Under ASME A17.1, what is a key difference between a LULA elevator and a standard passenger elevator regarding the hoistway enclosure?

    Answer: LULA elevators may use a non-fire-rated enclosure if travel is 25 feet or less in certain conditions

    ASME A17.1 Section 5.3 allows LULA elevators under certain conditions to use non-fire-rated hoistway enclosures, unlike full passenger elevators which require fire-rated construction.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. naesai.org — Renewal, test delivery, eligibility, fees, retake fee · verified Nov 2026
  2. dropbox.com — Exam format, passing score, registration deadline, retake policy, score release, time limit · verified Nov 2026