PTS Protective Equipment (PPE) 2

Question 1

What is the minimum ANSI class rating required for a high-visibility vest worn by track workers in active rail corridors?

Accepted Answer

Class 2

Answer

ANSI Class 2 high-visibility apparel is the minimum required for workers in active rail corridors due to its greater retroreflective material coverage.

Question 2

Which type of glove material provides the best protection against cuts from sharp rail edges and track spikes?

Accepted Answer

Cut-resistant Kevlar gloves

Answer

Cut-resistant Kevlar gloves are rated for protection against sharp metal edges and are required for handling rail, spikes, and other sharp track components.

Question 3

A track worker's hard hat has a visible crack in the shell. What is the correct action?

Accepted Answer

Remove it from service immediately and replace it

Answer

Any crack, dent, or deformity in a hard hat shell compromises its structural integrity and requires immediate removal from service.

Question 4

Steel-toed safety boots worn on the track must meet which ASTM standard for impact resistance?

Accepted Answer

ASTM F2413

Answer

ASTM F2413 is the standard specification for performance requirements for protective (safety) toe cap footwear used in industrial and rail environments.

Question 5

When should track workers wear hearing protection rated at NRR 25 or higher?

Accepted Answer

Whenever ambient noise exceeds 85 dB(A) over an 8-hour shift

Answer

OSHA mandates hearing protection when workers are exposed to 85 dB(A) or more as an 8-hour time-weighted average, regardless of the noise source.

PTS - Personal Track Safety Practice Test

PTS - Personal Track Safety Practice Test

PTS Protective Equipment (PPE) 2