PTS Train Speeds and Stopping Distances

Question 1

Approximately how far does a train travelling at 125 mph require to stop under emergency braking?

Accepted Answer

Around 2,500 metres

Answer

A train travelling at 125 mph (the UK East Coast Main Line maximum) requires approximately 2,500 metres (roughly 1.5 miles) to stop under emergency braking. This enormous stopping distance is why track workers cannot rely on a driver seeing them and stopping in time.

Question 2

A key reason track workers must NEVER rely on a train driver seeing them and stopping is:

Accepted Answer

Train stopping distances are far too great to protect a worker who has been spotted late

Answer

Even at moderate speeds, the stopping distance of a train far exceeds what would be needed to protect a track worker. At 75 mph a train needs around 1,000 metres to stop. A driver spotting a worker at 200 metres cannot prevent a collision, which is why safe systems of work — not driver reaction — are the primary protection.

Question 3

Which statement about train speeds is CORRECT for someone working on or near the line?

Accepted Answer

Trains may travel at full line speed even past an active worksite unless a specific speed restriction is in place

Answer

Unless a formal Temporary Speed Restriction (TSR) has been imposed as part of the Safe System of Work, trains may pass at full line speed. Track workers must never assume a train will slow down for them — protection comes from proper safe systems, not from train drivers.

Question 4

The concept of 'warning time' in PTS is directly related to train speeds because:

Accepted Answer

Warning time must allow all workers to reach a position of safety before the train arrives

Answer

Warning time is calculated to give track workers sufficient time to stop work, collect tools, and reach a position of safety before a train arrives. Because trains at higher speeds cover distance faster, the required warning distance increases with line speed — making knowledge of train speeds central to understanding PTS.

Question 5

On a line with a 60 mph maximum speed, which best describes the stopping distance of a typical passenger train under emergency braking?

Accepted Answer

Approximately 600–900 metres

Answer

At 60 mph a typical passenger train requires roughly 600–900 metres to stop under emergency braking. This is many times greater than the average human's reaction and movement time, reinforcing why warning systems and positions of safety — not driver braking — protect track workers.

PTS - Personal Track Safety Practice Test

PTS - Personal Track Safety Practice Test

PTS Train Speeds and Stopping Distances