PTS On-Track Plant and Machinery Safety

Question 1

What is 'On-Track Plant' (OTP) in the context of railway safety?

Accepted Answer

Machines and vehicles that travel on railway rails and are used for track maintenance

Answer

On-Track Plant (OTP) refers to self-propelled or towed machines that run on the railway lines and are used for maintenance tasks — examples include tamping machines, ballast regulators, stoneblowers, and road-rail vehicles (RRVs). They present unique hazards because they occupy the track and move within worksites.

Question 2

A road-rail vehicle (RRV) operating within a safe system of work is dangerous to track workers because:

Accepted Answer

Workers can be struck or crushed by the plant within the worksite, even in a possession or blocked line

Answer

Even in a possession where line trains are excluded, an RRV or other OTP machine can strike, crush, or run over a worker within the worksite. Workers must stay out of the machine's working envelope (the area it can reach or swing into) and must not assume the OTP operator can see them at all times.

Question 3

Before any On-Track Plant begins moving on or near where people are working, the OTP operator should:

Accepted Answer

Sound an audible warning and ensure all workers are clear of the plant's movement area

Answer

OTP operators must sound an audible warning before any movement and confirm that all workers are clear of the intended direction of travel and the machine's working envelope. The COSS also has a responsibility to ensure the worksite is managed so that plant movements are coordinated with worker positions.

Question 4

What is the 'working envelope' of a piece of On-Track Plant?

Accepted Answer

The full three-dimensional area that the machine's moving parts can reach during operation

Answer

The working envelope is the complete three-dimensional space that any part of the machine — including arms, booms, discharge chutes, or rotating components — can occupy during normal operation. Workers must remain outside this envelope at all times when the machine is in use or could move.

Question 5

When a road-rail vehicle needs to travel along the line through a section of track where workers are present, who is responsible for ensuring the workers are positioned safely?

Accepted Answer

The COSS, who must coordinate with the OTP operator and ensure all workers are in a safe position before authorising movement

Answer

The COSS is responsible for the safety of workers within the safe system of work, including coordinating with OTP operators. Before plant moves through or within the worksite, the COSS must ensure workers are at a position of safety and give clearance. The OTP operator and COSS must communicate clearly before any such movement.

PTS - Personal Track Safety Practice Test

PTS - Personal Track Safety Practice Test

PTS On-Track Plant and Machinery Safety