← All Propane Certification Flashcard Decks

Propane Storage and Handling Flashcards

7 cards from real Propane Certification practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Propane Storage and Handling flashcards as text
  1. What is the maximum fill level allowed for propane containers, expressed as a percentage of water capacity?

    Answer: 80%

    Propane containers must never be filled beyond 80% of their water capacity to allow space for liquid expansion as temperature rises.

  2. How must DOT propane cylinders be positioned when in active use?

    Answer: Upright with the valve end up

    DOT cylinders must be used in the upright position with the valve end up to ensure only vapor, not liquid propane, exits the container during normal operation.

  3. What is the maximum temperature that propane containers should be exposed to during storage, per NFPA 58?

    Answer: 120°F

    Per NFPA 58, propane containers must not be exposed to temperatures exceeding 120°F, as higher temperatures can dangerously increase pressure inside the container.

  4. Which type of valve protection is required on propane cylinders that are not connected to an appliance or manifold?

    Answer: A protective cap or plug over the valve outlet

    Valve outlets on cylinders not in service must be protected with a cap or plug to prevent contamination, damage, and accidental gas release.

  5. When storing propane cylinders indoors, what is the maximum aggregate LP-Gas content allowed in a standard storage room without requiring specially constructed facilities?

    Answer: 300 pounds

    NFPA 58 permits up to 300 pounds of LP-Gas in a standard indoor storage area; quantities above this require a purpose-built storage room meeting additional construction requirements.

  6. What minimum distance must ASME propane containers of 125 to 500 gallons water capacity be located from buildings?

    Answer: 10 feet

    NFPA 58 Table 6.3.1 requires a minimum 10-foot separation between containers of 125 to 500 gallons WC and buildings to provide clearance for emergency response and reduce fire exposure.

  7. How should propane cylinders be secured to prevent tipping or falling during storage?

    Answer: Chained, strapped, or otherwise restrained in an upright position

    Cylinders must be chained, strapped, or otherwise restrained to prevent tipping, which could damage the valve and cause an uncontrolled gas release.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. rrc.texas.gov — Passing score, test delivery, eligibility, fees, registration deadline, renewal, retake fee · verified Nov 2026
  2. propane.com — Test delivery · verified Oct 2026