Part P Bathroom Zone Regulations 4

Question 1

What is the maximum length of cable permitted for a connection in a bathroom zone between a ceiling rose and a pendant fitting?

Accepted Answer

There is no specific maximum length, but the fitting must be appropriate for the zone and the flex must be rated for the temperature and use

Answer

There is no specific maximum length prescribed for a bathroom flex, but the luminaire and its connections must be appropriate for the zone conditions; pendant fittings should not hang into Zone 1 unless rated for Zone 1.

Question 2

Can a bathroom fan be installed in Zone 1?

Accepted Answer

Yes, if it has a minimum IP rating of IPX4 and is specifically rated for Zone 1 installation

Answer

Extractor fans with a minimum IPX4 rating and specifically rated for Zone 1 may be installed in Zone 1; many bathroom fans are designed and marked for installation in bathroom zones.

Question 3

What does the marking 'IP44' mean on an electrical accessory?

Accepted Answer

Protected against solid objects greater than 1 mm diameter, and protected against water splashing from any direction

Answer

IP44: the first digit '4' indicates protection against solid objects greater than 1 mm (including wire and tools); the second digit '4' indicates protection against water splashing from any direction — suitable for Zone 2.

Question 4

Is a bathroom mirror light with integrated socket permitted in Zone 1?

Accepted Answer

Only if it is a SELV shaver unit conforming to BS EN 61558-2-5 with appropriate IP rating for Zone 1

Answer

Mirror lights with shaver sockets are only permitted in Zone 1 if they incorporate a SELV isolating transformer (BS EN 61558-2-5) and have an appropriate IP rating; standard socket-fitted mirrors cannot be in Zone 1.

Question 5

What does 'PELV' stand for and can it be used in bathroom Zone 0?

Accepted Answer

Protected Extra Low Voltage — no, it cannot be used in Zone 0 because it is referenced to earth, which means a fault to earth in the water could be hazardous; only SELV is permitted

Answer

PELV (Protected ELV) operates at extra-low voltage but has a connection to earth; in Zone 0, where the user is immersed in water, an earthed circuit could present a shock risk, so only SELV (separated from earth) is permitted.

Part P Electrical Practice Test

Part P Electrical Practice Test

Part P Bathroom Zone Regulations 4