Paintless Dent Repair PDR Techniques and Methods

Question 1

What is the primary goal of the 'pushing' technique in PDR?

Accepted Answer

To push metal back to its original position from behind

Answer

The pushing technique in PDR involves applying pressure from behind the panel to restore the metal to its original position without damaging the paint.

Question 2

What does 'blending' refer to in PDR?

Accepted Answer

Feathering the repaired area so it matches surrounding metal contours

Answer

Blending in PDR means working the metal edges of a repair so the transition between repaired and undamaged areas is smooth and invisible.

Question 3

Which PDR method uses a rod inserted through an existing opening rather than drilling access holes?

Accepted Answer

Port access technique

Answer

Port access technique involves routing PDR rods through pre-existing openings such as window frames, door jambs, or light housings to reach dent areas.

Question 4

When should a PDR technician use the 'tap-down' method?

Accepted Answer

To flatten high spots or crowns around a dent

Answer

The tap-down method is used to flatten raised high spots or crowns that form around the perimeter of a dent during the repair process.

Question 5

What is 'overpush' in PDR terminology?

Accepted Answer

Pushing the metal beyond its original position creating a high spot

Answer

An overpush occurs when the technician pushes the metal past its correct level, creating a raised high spot that then requires corrective work.

Paintless Dent Repair Practice Test

Paintless Dent Repair Practice Test

Paintless Dent Repair PDR Techniques and Methods