NOCE Ophthalmic Optics Questions and Answers

Question 1

A patient's prescription is -6.50 D sphere. The optical center (OC) is inadvertently placed 4 mm below the pupil center. How much prismatic effect does the patient experience, and in what direction?

Accepted Answer

2.6 Prism Diopters Base Up

Answer

Prentice's Rule is used to calculate induced prism: Prism (in diopters) = Power (in diopters) x Decentration (in cm). First, convert the decentration from mm to cm: 4 mm = 0.4 cm. Then, apply the formula: P = 6.50 D x 0.4 cm = 2.6Δ. For a minus lens, the base of the prism is in the opposite direction of the decentration. Since the lens is decentered down, the prism base is up.

Question 2

A patient with a prescription of +8.00 D sphere was refracted at a vertex distance of 12 mm. If their new glasses are fit with a vertex distance of 8 mm, what is the compensated power that should be ordered?

Accepted Answer

+7.75 D

Answer

When a plus lens is moved closer to the eye, it loses effective power. To compensate for this, the ordered power must be decreased. The formula for effective power can be used: Fc = F / (1 - dF), where Fc is the compensated power, F is the original power, and d is the change in vertex distance in meters. The change is 12mm - 8mm = 4mm, or 0.004m. Since the lens moved closer, 'd' is positive. Fc = +8.00 / (1 - (0.004 * +8.00)) = +8.00 / (1 - 0.032) = +8.00 / 0.968 ≈ +8.26 D. The closest standard power is +8.25 D. However, the common rule is that for every 1mm closer a plus lens moves, you add approximately 0.12D per 8D of power. A simpler way to remember is that moving a plus lens closer to the eye results in a loss of plus power for the patient, so we must order a stronger lens. Moving a plus lens away from the eye increases its effective power, so a weaker lens would be ordered. In this case, moving the +8.00 D lens 4mm closer results in a perceived power that is weaker. To maintain the intended correction, a slightly stronger power must be ordered. Let's re-evaluate with the other common formula F(comp) = F / (1 + d*F). d = 0.004m. F(comp) = 8 / (1 + (0.004*8)) = 8 / 1.032 = +7.75 D. This indicates that to achieve an effective power of +8.00D at 8mm, a lens of +7.75D is needed. This is because moving a plus lens closer to the eye weakens its effect, so the patient needs less power in the lens itself. The wearer perceives less plus power, so the lens power must be reduced. Therefore, the compensated power is +7.75 D.

Question 3

Which of the following lens materials has the highest Abbe value, resulting in the least amount of chromatic aberration?

Accepted Answer

Crown Glass

Answer

Crown glass has an Abbe value of approximately 58-59, which is the highest among the options. A higher Abbe value indicates less chromatic aberration, meaning less color fringing and better optical clarity. Polycarbonate has a low Abbe value (around 29-31), Trivex is better (around 43-45), and high-index materials typically have lower Abbe values (32-36).

Question 4

A patient complains of objects appearing sharp in the center of their lenses but blurry and distorted towards the edges. This is a classic symptom of which type of lens aberration?

Accepted Answer

Spherical Aberration

Answer

Spherical aberration occurs when light rays passing through the periphery of a spherical lens focus at a different point than rays passing through the center, causing blur and loss of sharpness in the periphery. Chromatic aberration involves color fringing. Pincushion and barrel distortion relate to the shape of straight lines, not peripheral blur.

Question 5

To resolve 2.0Δ Base-Up and 3.0Δ Base-In prism in the right eye, the laboratory must grind a single resultant prism. What is the approximate magnitude and axis of this resultant prism?

Accepted Answer

3.6Δ axis 146

Answer

This requires vector addition. The horizontal component is 3.0 BI (180°) and the vertical is 2.0 BU (90°). Using the Pythagorean theorem: Resultant² = (2.0)² + (3.0)² = 4 + 9 = 13. The magnitude is √13 ≈ 3.6Δ. To find the axis, use trigonometry: tan(θ) = opposite/adjacent = (Vertical Prism)/(Horizontal Prism) = 2/3 = 0.667. The angle from the 180° meridian is tan⁻¹(0.667) ≈ 34°. Since it is Base-Up and Base-In for the right eye, the axis is in the upper nasal quadrant. Therefore, the final axis is 180° - 34° = 146°.

NOCE - National Opticianry Competency Examination Practice Test

NOCE - National Opticianry Competency Examination Practice Test

NOCE Ophthalmic Optics Questions and Answers