NOCE - National Opticianry Competency Examination Ophthalmic Optics and Lenses Questions and Answers

Question 1

A patient is looking 5 mm below the optical center of a lens with a power of -6.00 D in the vertical meridian. According to Prentice's Rule, what is the amount and direction of the induced prism?

Accepted Answer

3.0 Δ Base Up

Answer

Prentice's Rule states that the prismatic effect (in prism diopters) is equal to the lens power (in diopters) multiplied by the decentration (in centimeters). Formula: P = dC. Here, P = (5 mm / 10) * -6.00 D = 0.5 cm * -6.00 D = -3.0 Δ. For a minus lens, the base of the prism is in the same direction as the optical center. Since the patient is looking below the OC, the OC is effectively moved up, resulting in Base Up prism.

Question 2

A patient with significant anisometropia is experiencing vertical imbalance and diplopia when reading through their new bifocal lenses. Which of the following is the most appropriate solution to correct this issue?

Accepted Answer

Slab-off (bicentric grind)

Answer

Slab-off, or bicentric grinding, is a fabrication technique used to correct vertical imbalance at the reading level in anisometropic prescriptions. It involves grinding base-up prism onto the lower half of the lens with the most minus or least plus power in the vertical meridian to neutralize the unwanted prismatic effect.

Question 3

An optician is helping a patient select a lens material. The patient is very sensitive to color fringes (chromatic aberration), especially in their peripheral vision. Which of the following lens materials would be the best recommendation?

Accepted Answer

Crown Glass (Abbe ≈ 59)

Answer

The Abbe value of a lens material indicates the degree of chromatic aberration; a higher Abbe value means less chromatic aberration (color fringing). Crown glass has a significantly higher Abbe value (around 59) compared to polycarbonate and high-index plastics, making it the superior choice for minimizing chromatic aberration.

Question 4

According to ANSI Z80.1 standards for dress eyewear, what is the primary purpose of these regulations?

Accepted Answer

To provide recommendations and tolerances for the optical and physical characteristics of prescription lenses.

Answer

The ANSI Z80.1 standard applies to all prescription dress ophthalmic spectacle lenses and provides guidelines and tolerances for fabricators and assemblers. It covers aspects like lens power, cylinder axis, prism, and physical integrity, but does not mandate specific materials or regulate pricing.

Question 5

A patient's pupillary distance (PD) is 62 mm. They have selected a frame with an 'A' measurement of 52 mm and a distance between lenses (DBL) of 18 mm. What is the total decentration required for this order?

Accepted Answer

8 mm

Answer

First, calculate the Frame PD (also known as Geometric Center Distance or GCD) by adding the 'A' measurement and the DBL: 52 mm + 18 mm = 70 mm. Then, find the total decentration by subtracting the patient's PD from the Frame PD: 70 mm - 62 mm = 8 mm.

NOCE - National Opticianry Competency Examination Practice Test

NOCE - National Opticianry Competency Examination Practice Test

NOCE - National Opticianry Competency Examination Ophthalmic Optics and Lenses Questions and Answers