NCCCO OSHA Crane Regulations 29 CFR 1926 2

Question 1

Under OSHA 29 CFR 1926.1427, crane operators on construction sites must be qualified or certified by what means?

Accepted Answer

Certification by an accredited testing organization, qualification by an audited employer program, qualification by the U.S. military, or a qualifying state or local licensing program

Answer

OSHA 1926.1427 allows operator qualification or certification through four pathways: accredited testing organization certification, audited employer qualification program, U.S. military qualification, or a qualifying state or local licensing program.

Question 2

What does OSHA 29 CFR 1926.1408 specify regarding the minimum safe distance from energized power lines during crane operations?

Accepted Answer

Minimum distances depend on line voltage: 10 feet for lines up to 50 kV, with additional distance for higher voltages, unless the utility owner de-energizes or installs insulating guards

Answer

OSHA 1926.1408 specifies minimum distances based on line voltage: 10 feet for lines up to 50 kV, 10 feet plus 4 inches for each additional 10 kV above 50 kV, or the line must be de-energized, relocated, or guarded.

Question 3

Under OSHA 29 CFR 1926.1402, who is responsible for ensuring the ground conditions are adequate for crane setup?

Accepted Answer

The employer, with a qualified person assessing ground conditions, and the controlling entity providing ground condition information to the crane employer

Answer

OSHA 1926.1402 requires the controlling entity (general contractor or project owner) to inform the crane employer of ground conditions, and requires the crane employer and a qualified person to assess adequacy before setup.

Question 4

What does OSHA 29 CFR 1926.1413 require regarding wire rope inspections?

Accepted Answer

A visual inspection of all running and standing wire ropes must be performed before each shift, with more thorough monthly inspections by a qualified person

Answer

OSHA 1926.1413 requires a pre-shift visual inspection of all ropes by the operator, and monthly inspections by a qualified person, with documented records. Specific criteria for removal from service are provided.

Question 5

Under OSHA 29 CFR 1926.1430, what training is required for crane operators beyond basic certification?

Accepted Answer

Operators must receive site-specific training and familiarization for each crane model and site conditions before operating on a new site or with unfamiliar equipment

Answer

OSHA 1926.1430 requires employers to ensure operators receive training on the specific equipment model they will operate, site-specific conditions, and the content of applicable standards. Certification alone is insufficient for unfamiliar equipment or sites.

NCCCO (National Commission for the Certification of Crane Operators) Practice Test

NCCCO (National Commission for the Certification of Crane Operators) Practice Test

NCCCO OSHA Crane Regulations 29 CFR 1926 2