IPAF Pre-Use Inspection

Question 1

How often should a pre-use inspection of a MEWP be carried out according to IPAF guidance?

Accepted Answer

At the start of every shift before use

Answer

IPAF requires a pre-use inspection at the start of every shift before operating the MEWP. This daily check ensures the machine is safe and fit for purpose before any work begins.

Question 2

During a pre-use inspection, which of the following should be checked on the MEWP's hydraulic system?

Accepted Answer

Hoses and fittings for leaks, damage, or chafing

Answer

Hydraulic hoses and fittings must be visually inspected for leaks, damage, abrasion, or chafing. A hydraulic failure could cause the platform to drop unexpectedly, posing a serious risk to the operator.

Question 3

What action should an operator take if they discover a fault during the pre-use inspection?

Accepted Answer

Tag the machine as defective, do not use it, and report to the supervisor

Answer

If any fault is found during a pre-use inspection, the operator must not use the machine. It should be tagged as defective, taken out of service, and the fault reported immediately to the supervisor or responsible person.

Question 4

Which of the following is NOT typically part of a MEWP pre-use inspection checklist?

Accepted Answer

Carrying out a load test at maximum capacity

Answer

A load test at maximum capacity is not part of a daily pre-use inspection — it is carried out during thorough examinations by competent persons (usually every 6 months under LOLER). Pre-use checks focus on visual inspection and function tests.

Question 5

What document should be used to record the results of a MEWP pre-use inspection?

Accepted Answer

A pre-use inspection checklist or report form

Answer

All pre-use inspections should be recorded on a checklist or report form. This provides an auditable record, helps track recurring issues, and demonstrates compliance with PUWER and LOLER regulations.

IPAF PAL Card Practice Test

IPAF PAL Card Practice Test

IPAF Pre-Use Inspection