FREE Walmart Maintenance Technician Question and Answers

Question 1

At the base of the right side panels of two tanks are exit tubes with the same cross-section A.
Which aperture will allow for more water to exit—the left (1) or the right (2)?

Note: Friction loss is minimal due to the outlet pipes' short length. The outlet tubes' different lengths are unimportant and intended to deceive you.

Accepted Answer

The same at both openings

Answer

According to Torricelli's Law, the efflux velocity of a fluid from an opening depends solely on the height of the fluid above that opening, assuming negligible friction. Since both tanks have exit tubes at the same depth and with the same cross-section, and the water levels are presumably equal, the pressure and velocity of the water exiting will be identical. Therefore, the same amount of water will exit from both openings.

Question 2

What would the PLC program below corresponding Boolean expression be?

Accepted Answer

C (AB+D)

Answer

In PLC ladder logic, contacts in series represent an AND operation, while contacts in parallel represent an OR operation. If A and B are in series, that's AB. If this combination is in parallel with D, it becomes (AB+D). Finally, if C is in series with the entire (AB+D) block, the resulting Boolean expression is C(AB+D).

Question 3

What are flexible couplings used for?

Accepted Answer

Allow shaft misalignment

Answer

Flexible couplings are mechanical devices used to connect two shafts together at their ends for power transmission. Their primary function is to accommodate various types of misalignment (angular, parallel, and axial) between the shafts, absorb shock, and reduce vibration. This prevents excessive stress and wear on bearings and other connected machinery components.

Question 4

When a precise, low flow is required, which style of valve should be used?

Accepted Answer

Needle

Answer

Needle valves are specifically designed for very precise control of fluid flow, particularly at low flow rates. Their unique design features a long, tapered stem that gradually opens or closes a small orifice, allowing for fine adjustments to the flow. This makes them ideal for applications requiring accurate regulation, unlike gate or check valves which are for on/off or one-way flow respectively.

Question 5

Which wrench makes it simpler to remove a particular bolt? (If equal, go with C.)

Accepted Answer

B

Answer

To remove a bolt, torque is required, which is the product of force and the length of the lever arm (wrench). A longer wrench provides greater leverage, meaning that for the same amount of force applied, a greater torque can be generated. Therefore, Wrench B, being longer, makes it simpler to loosen a tight bolt by requiring less effort.

Walmart Practice Test

Walmart Practice Test

FREE Walmart Maintenance Technician Question and Answers