FREE TBAS Airplane Tracking Questions and Answers

Question 1

During the Airplane Tracking Test, what is the primary objective?

Accepted Answer

To keep the aircraft symbol centered on the moving target

Answer

In the Airplane Tracking Test, the primary objective is to continuously align the aircraft symbol with a moving target on the display. This task assesses a pilot's ability to maintain precise control and coordination. It simulates the demands of tracking an object or maintaining a specific flight path.

Question 2

Which control input is most commonly used to keep the aircraft symbol centered on the target?

Accepted Answer

Aileron and elevator inputs

Answer

To keep the aircraft symbol centered on a moving target, a pilot typically uses both aileron and elevator inputs. Ailerons control roll for horizontal adjustments, while elevators control pitch for vertical adjustments. Coordinated use of these controls allows for precise two-dimensional tracking of the target.

Question 3

If the target moves up and to the left on the display, what should the pilot do?

Accepted Answer

Apply left aileron and pull the stick back

Answer

If the target moves up and to the left, the pilot needs to move the aircraft symbol up and to the left to re-center it. To move up, the pilot pulls the stick back (elevator input). To move left, the pilot applies left aileron (roll input). Therefore, applying left aileron and pulling the stick back is the correct combined action.

Question 4

What role does hand-eye coordination play in the Airplane Tracking Test?

Accepted Answer

It assists in tracking the target accurately

Answer

Hand-eye coordination is crucial in the Airplane Tracking Test because it allows a pilot to precisely translate visual information from the display into accurate control inputs. This skill enables the pilot to anticipate and react to the target's movements, making fine adjustments to keep the aircraft symbol aligned. Accurate tracking is directly dependent on this ability to synchronize visual perception with motor responses.

Question 5

How can a pilot determine if they are overcorrecting during the Airplane Tracking Test?

Accepted Answer

The aircraft symbol oscillates around the target

Answer

Overcorrecting during the Airplane Tracking Test is typically indicated when the aircraft symbol oscillates around the target. This means the pilot is applying too much input, causing the symbol to overshoot the target in one direction, then overcompensating and overshooting in the opposite direction. This unstable back-and-forth movement is a clear sign of excessive control inputs.

TBAS - Test of Basic Aviation Skills Practice Test

TBAS - Test of Basic Aviation Skills Practice Test

FREE TBAS Airplane Tracking Questions and Answers