FREE NCCCO Principles of Crane Stability and Structural Integrity Questions and Answers

Question 1

On a mobile crane load chart, capacities listed above a bold line or marked with an asterisk (*) are typically based on what?

Accepted Answer

The crane's structural integrity.

Answer

Load charts are divided into two primary domains. Capacities above the bold line (or marked with an asterisk) are limited by the structural strength of the crane's components, like the boom. Capacities below the line are limited by the crane's stability, or its resistance to tipping.

Question 2

How does increasing the load radius affect a crane's rated capacity?

Accepted Answer

It decreases the capacity.

Answer

The load radius is the horizontal distance from the crane's center of rotation to the center of the load. Increasing this distance increases the leverage, or moment, that the load exerts on the crane. To maintain stability, the weight of the load must be decreased as the radius increases.

Question 3

What is the 'tipping axis' or 'fulcrum' of a crawler crane?

Accepted Answer

The edge of the crawler tracks.

Answer

The tipping axis is the line about which a crane will tip over if it becomes unstable. For a crawler crane, this tipping point is typically the idler or sprocket at the end of the crawler tracks on the side of the lift.

Question 4

A crane's stability is greatest when its center of gravity is:

Accepted Answer

As low as possible and near the center of rotation.

Answer

A lower center of gravity increases an object's stability. For a crane, keeping the combined center of gravity (including the crane's own weight, counterweight, and load) as low as possible and as close to the center of rotation as possible maximizes its stability and resistance to tipping.

Question 5

What is the most critical factor for ensuring maximum stability when setting up a crane on outriggers?

Accepted Answer

Making sure the outriggers are on firm, level ground.

Answer

While all setup steps are important, the foundation is the most critical. The crane must be perfectly level on ground that is firm enough to support the immense pressures exerted by the outrigger pads. Failure of the ground beneath an outrigger is a common cause of crane tipping accidents.

NCCCO (National Commission for the Certification of Crane Operators) Practice Test

NCCCO (National Commission for the Certification of Crane Operators) Practice Test

FREE NCCCO Principles of Crane Stability and Structural Integrity Questions and Answers