FREE CIS IAHCSMM Questions and Answers

Question 1

Aluminum items should be cleaned:

Accepted Answer

Using a to and fro motion with the grain

Answer

When cleaning aluminum items, it is recommended to use a to and fro motion with the grain. This means moving the cleaning tool back and forth in the direction of the grain or pattern on the surface of the aluminum. This method helps to prevent scratching or damaging the aluminum and ensures a thorough and effective cleaning. Using a circular motion or a stiff metal brush can potentially cause scratches or other damage to the aluminum surface.
Using a water spray alone may not be sufficient to remove dirt and grime from the surface.

Question 2

Powered surgical instruments:

Accepted Answer

Can not be immersed

Answer

Powered surgical instruments cannot be immersed because they contain electrical components that can be damaged by water. Immersion can cause short circuits, corrosion, and other damage to the instrument. Therefore, it is important to clean these instruments using alternative methods that do not involve submerging them in water.

Question 3

The use of heat to kill microorganisms, except spores.

Accepted Answer

Thermal Disinfection

Answer

Thermal disinfection refers to the use of heat to kill microorganisms, except for spores. This process involves subjecting objects or surfaces to high temperatures for a specific period of time to effectively eliminate or reduce the number of harmful bacteria, viruses, and other pathogens.
While sterilization is a more comprehensive process that aims to kill all forms of microorganisms, including spores, thermal disinfection is a less intense method that focuses on eliminating most microorganisms but may not be effective against spores.

Question 4

Detergents used in mechanical cleaners should be:

Accepted Answer

Low foaming

Answer

Detergents used in mechanical cleaners should be low foaming because excessive foam can interfere with the cleaning process and cause issues such as reduced cleaning efficiency, overflow, and damage to the equipment. Low foaming detergents ensure that the cleaning solution can effectively reach the surfaces being cleaned without creating excessive foam.
This allows for better contact between the detergent and the dirt or stains, resulting in more effective cleaning. Additionally, low foaming detergents are easier to rinse off, leaving behind minimal residue.

Question 5

The use of heat to kill all microorganisms, except spores, is called:

Accepted Answer

Thermal Disinfection

Answer

Thermal disinfection is the use of heat to kill all microorganisms, except spores. This process involves exposing the objects or surfaces to high temperatures for a specific period of time, which effectively destroys most types of bacteria, viruses, and fungi. However, spores, which are highly resistant to heat, may survive this process.
Therefore, thermal disinfection is not as effective as sterilization, which eliminates all microorganisms, including spores. High-level disinfection refers to the process of killing all microorganisms, including some spores, while mechanical disinfection is not a recognized term in the context of microbial control.

CIS - Certified Instrument Specialist Practice Test

CIS - Certified Instrument Specialist Practice Test

FREE CIS IAHCSMM Questions and Answers