CIS - Certified Instrument Specialist Instrument Inspection and Testing Questions and Answers

Question 1

A Certified Instrument Specialist is testing the sharpness of a pair of standard scissors that are 5 inches long. According to industry best practices, which testing material should be used?

Accepted Answer

Red test material

Answer

Yellow test material

Answer

An index card

Answer

A plastic dowel rod

Question 2

During the inspection of a laparoscopic instrument with insulation, a technician notes no visible cracks or peels. However, to ensure patient safety from unintended burns, what is the essential next step?

Accepted Answer

Use an insulation integrity tester

Answer

Visually inspect the instrument under magnification

Answer

Perform a functional test of the instrument's jaws

Answer

Check for alignment of the distal tip

Question 3

Which of the following is the PRIMARY reason for meticulously inspecting surgical instruments for cleanliness and damage after decontamination and prior to sterilization?

Accepted Answer

To ensure the sterilization process will be effective and to prevent patient harm

Answer

To ensure the instrument's polish and finish are maintained

Answer

To prevent damage to the automated sterilizer

Answer

To extend the overall lifespan of the instrument

Question 4

A sterile processing technician is inspecting a needle holder. What is the correct method to test its functionality?

Accepted Answer

Clamp a needle in the jaw and ensure it cannot be easily turned

Answer

Close the jaws and hold them up to a light to check for gaps

Answer

Tap the ratchets gently on a table to ensure they hold

Answer

Cut through a piece of gauze to test the jaw's sharpness

Question 5

When inspecting a rongeur, what is the appropriate material to use for a functional sharpness test?

Accepted Answer

An index card

Answer

A wooden dowel

Answer

Red test material

Answer

Surgical gauze

Question 6

A technician is assembling a multi-part instrument and notices a small amount of play in a screw. What is the most appropriate action to take?

Accepted Answer

Use a tool to tighten the screw if permitted by the IFU, then re-inspect

Answer

Disassemble the instrument and send it for repair

Answer

Lubricate the screw and continue with assembly

Answer

Ignore the issue as it is minor and will not affect function

A Certified Instrument Specialist is testing the sharpness of a pair of standard scissors that are 5 inches long.According to industry best practices, which testing material should be used?

A Certified Instrument Specialist is testing the sharpness of a pair of standard scissors that are 5 inches long.
According to industry best practices, which testing material should be used?