FREE CAFM Vehicle Maintenance and Repair Questions and Answers

Question 1

A fleet manager is implementing a predictive maintenance program using telematics data. Which of the following is the PRIMARY advantage of this approach over a traditional preventive maintenance schedule?

Accepted Answer

It services vehicles based on actual component condition and usage data, optimizing service intervals.

Answer

Predictive maintenance uses real-time telematics data, such as engine fault codes, mileage, and operating hours, to forecast when a component is likely to fail. This allows maintenance to be scheduled just before a failure occurs, moving beyond fixed time or mileage intervals of traditional preventive maintenance. This data-driven approach optimizes service timing, reduces unnecessary servicing, and minimizes unexpected breakdowns.

Question 2

To maximize a fleet's warranty recovery rate, which of the following is the MOST critical practice for a maintenance shop to implement?

Accepted Answer

Implementing a meticulous process for documenting repairs, coding work orders, and retaining failed parts for inspection.

Answer

Successful warranty recovery hinges on providing manufacturers with precise and thorough documentation to justify a claim. This includes accurate repair orders, correct coding for parts and labor, and following a strict parts retention policy, as manufacturers often require the failed component for inspection before approving a claim.

Question 3

A fleet manager observes a high rate of premature tire wear, specifically on the outer edges of the front tires across multiple vehicles of the same model. What is the MOST likely cause of this specific wear pattern?

Accepted Answer

Incorrect wheel alignment, specifically improper toe or camber.

Answer

Wear on the outer edges of tires is a classic symptom of incorrect wheel alignment. Specifically, issues with the camber (the vertical tilt of the wheel) or toe (the direction the tires point relative to each other) cause the tire to make improper contact with the road surface, leading to accelerated and uneven wear. While inflation and driving habits affect tire life, this distinct pattern points directly to alignment.

Question 4

Which of the following Key Performance Indicators (KPIs) is the best measure of a maintenance shop's efficiency and a technician's productivity?

Accepted Answer

Wrench Time or Technician Utilization

Answer

Wrench Time, also known as Technician Utilization, measures the percentage of a technician's paid time that is spent directly working on a vehicle ('turning a wrench'). It is a direct indicator of shop efficiency, as low wrench time can point to issues like poor workflow, parts delays, or inadequate tools, rather than technician performance alone. While other KPIs are crucial for overall fleet health, wrench time specifically measures the productivity of the maintenance operation itself.

Question 5

A fleet maintenance facility is undergoing a safety review by the Occupational Safety and Health Administration (OSHA). Under the General Industry standards (29 CFR 1910), which of the following is a mandatory requirement for the employer?

Accepted Answer

Conducting a formal hazard assessment to determine the necessity and selection of Personal Protective Equipment (PPE).

Answer

According to OSHA standard 29 CFR 1910.132, employers are required to assess the workplace to determine if hazards are present that necessitate the use of personal protective equipment (PPE). If such hazards are present, the employer must select and have each affected employee use the types of PPE that will protect them from the identified hazards, and provide training on its proper use.

CAFM - Certified Automotive Fleet Manager Practice Test

CAFM - Certified Automotive Fleet Manager Practice Test

FREE CAFM Vehicle Maintenance and Repair Questions and Answers