FCTC Test Technical Reading and Recall Questions and Answers 2

Question 1

According to NFPA 1981, what is the minimum rated service duration required for a firefighter's SCBA used in IDLH conditions?

Accepted Answer

30 minutes

Answer

NFPA 1981 requires a minimum 30-minute rated service time for SCBA used in IDLH atmospheres during structural firefighting.

Question 2

A technical bulletin states: 'The maximum load on a single roof ladder hook shall not exceed the ladder rated load.' A 24-foot roof ladder is rated for 250 lbs. Two firefighters each weighing 200 lbs with gear attempt to use the ladder simultaneously. What does the bulletin require?

Accepted Answer

Only one firefighter may be on the ladder at a time to remain within the 250-lb rating

Answer

The bulletin limits total load to the rated capacity. Each firefighter weighs 200 lbs with gear, so combined weight of 400 lbs exceeds the 250-lb rating. Only one at a time is permitted.

Question 3

A firefighting manual states: 'The five building construction types (Types I through V) are classified by the fire resistance of structural components, not by material alone.' Type I is most fire-resistive and Type V is least. Which type would maintain structural integrity longest in a fire?

Accepted Answer

Type I fire-resistive construction

Answer

Type I construction uses fire-resistive rated structural members (protected steel and reinforced concrete) that maintain structural integrity under fire conditions for the longest period.

Question 4

A hose specification sheet states: 'Service test pressure for 2.5-inch attack hose is 300 psi.' A pump operator charges the line to 250 psi during a fire. Is the hose being operated within safe parameters?

Accepted Answer

Yes — 250 psi is below the 300 psi service test pressure

Answer

Service test pressure (300 psi) is a periodic proof-test pressure, not the maximum operating pressure. Operating at 250 psi is within normal safe limits.

Question 5

A TIC user guide states: 'TIC displays relative temperature differences. A completely dark image indicates all objects are at uniform temperature, NOT that the area is cool or safe.' A firefighter scans a smoke-filled room and sees a uniform dark TIC image. What should they conclude?

Accepted Answer

Uniform temperature does not confirm safety and additional verification is required before concluding anything

Answer

The user guide warns that a dark TIC image means uniform temperature, not a cool room. Additional verification is required before drawing any conclusion about safety.

FCTC Test Practice Test

FCTC Test Practice Test

FCTC Test Technical Reading and Recall Questions and Answers 2