FCTC Knowledge 2

Question 1

What is the primary purpose of a pre-incident plan?

Accepted Answer

To document building layout and hazards for emergency response

Answer

Pre-incident plans document building layouts, hazards, utilities, and access points to help firefighters respond more effectively and safely.

Question 2

Which class of fire involves energized electrical equipment?

Accepted Answer

Class C

Answer

Class C fires involve energized electrical equipment. Water should not be used on Class C fires due to the risk of electrical shock.

Question 3

What does the acronym 'PASS' stand for when using a fire extinguisher?

Accepted Answer

Pull, Aim, Squeeze, Sweep

Answer

PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep side to side.

Question 4

What is the recommended minimum distance from a structure fire that firefighters should establish the Incident Command Post?

Accepted Answer

At a safe distance upwind and away from the hazard zone

Answer

The Incident Command Post should be established at a safe distance upwind and away from the hazard zone to allow effective command without exposure to hazards.

Question 5

Which hose load is best suited for areas where space is limited and allows for a straight pull deployment?

Accepted Answer

Minuteman load

Answer

The Minuteman load allows a single firefighter to deploy the hose with a straight pull and is well-suited for tight spaces and narrow corridors.

FCTC Test Practice Test

FCTC Test Practice Test

FCTC Knowledge 2