CSWA - Certified Solidworks Associate Part Modification Features Questions and Answers

Question 1

A designer needs to add a taper to the vertical faces of a part that will be manufactured using injection molding. What is the primary purpose of applying a Draft feature in this scenario?

Accepted Answer

To allow for easy and damage-free ejection of the part from the mold.

Answer

The primary purpose of the Draft feature is to apply a taper or angle to faces of a part. In manufacturing processes like injection molding or casting, this taper is crucial for allowing the finished part to be removed from the mold without creating friction, suction, or damage to the part or the mold itself.

Question 2

You need to create a simple, thin support structure between two vertical walls of a part. The most efficient method is to use the Rib feature. Which of the following is a key characteristic of creating a Rib?

Accepted Answer

It can be effectively created from a single, open-contour line sketch.

Answer

The Rib feature is specifically designed to create thin support structures and is uniquely efficient because it can be generated from a simple open-contour sketch (like a single line). SolidWorks automatically adds the specified thickness and extends the material to the nearest surrounding faces.

Question 3

To create an engraved effect for a logo on the curved surface of a bottle, you have created a sketch on a plane tangent to the bottle. Which feature and type should be used to remove material from the bottle's face following the sketch?

Accepted Answer

Wrap feature with the 'Deboss' option.

Answer

The Wrap feature is used to project a sketch onto a curved (or flat) surface. To create an engraved or indented effect, which involves removing material, the 'Deboss' option is the correct choice. 'Emboss' adds material, and 'Scribe' only splits the face without adding or removing material.

Question 4

A designer wants to model the shared, overlapping volume between two intersecting solid bodies within a single part file. Which operation within the Combine feature should be used to achieve this result?

Accepted Answer

Common

Answer

The Combine feature performs Boolean operations on solid bodies. The 'Common' operation specifically isolates and retains only the volume that is shared or intersecting between the selected bodies, discarding all other geometry.

Question 5

You need to completely round the top of a rectangular block from one side to the other without specifying a radius value. Which is the most direct and robust method to achieve this?

Accepted Answer

Use a Full Round Fillet and select the two side faces and the top face.

Answer

The Full Round Fillet is specifically designed for this scenario. It creates a fillet tangent to three adjacent faces without requiring a radius input. By selecting the two opposing vertical faces and the top face connecting them, SolidWorks automatically calculates the necessary tangencies to create a perfect round. This method is also robust because it will automatically update if the width of the part changes.

CSWA - Certified Solidworks Associate Practice Test

CSWA - Certified Solidworks Associate Practice Test

CSWA - Certified Solidworks Associate Part Modification Features Questions and Answers