CHSP Hazard Identification and Control Questions and Answers

Question 1

A hospital is designing a new pharmacy cleanroom for compounding sterile preparations. To minimize the risk of airborne contamination, which of the following hazard control strategies should be prioritized during the design phase?

Accepted Answer

Installing a high-efficiency particulate air (HEPA) filtration system.

Answer

According to the hierarchy of controls, engineering controls are more effective than administrative controls or personal protective equipment (PPE) because they are designed to remove the hazard at the source. A HEPA filtration system is an engineering control that physically removes airborne contaminants, providing a more reliable and consistent level of protection than relying on PPE, training, or cleaning protocols alone.

Question 2

A healthcare safety professional is conducting a prospective risk assessment for a new robotic surgery program. Which of the following methods is most appropriate for proactively identifying potential failures and their effects before the program is implemented?

Accepted Answer

Failure Mode and Effects Analysis (FMEA)

Answer

Failure Mode and Effects Analysis (FMEA) is a proactive, systematic method used to identify and address potential problems and their resulting effects within a process before an adverse event occurs. In contrast, Root Cause Analysis (RCA) is a retrospective method used to analyze serious adverse events after they have happened. A Job Hazard Analysis (JHA) focuses on the relationship between a worker, a task, and the environment but is less comprehensive for a complex system like robotic surgery. Reviewing incident reports is also a retrospective approach.

Question 3

A medical unit has experienced an increase in musculoskeletal injuries among nursing staff, primarily related to repositioning bariatric patients. Which of the following administrative controls would be an appropriate component of a comprehensive Safe Patient Handling and Mobility (SPHM) program?

Accepted Answer

Implementing a policy that requires a team of at least two staff members and the use of a friction-reducing device for all bariatric patient repositioning tasks.

Answer

Administrative controls involve changing the way people work. Implementing a specific work practice policy, such as requiring a team lift and the use of an assistive device, is a classic example of an administrative control. Installing ceiling lifts and replacing beds are engineering controls. Providing back belts is a form of personal protective equipment (PPE), which is the least effective control measure.

Question 4

A Job Hazard Analysis (JHA) is being performed for the task of changing a medical gas cylinder. What is the primary purpose of the first step in the JHA process?

Accepted Answer

To break down the job into a sequence of basic steps.

Answer

The first fundamental step in conducting a Job Hazard Analysis (JHA) is to break the job down into a sequence of distinct steps or tasks. Only after the job steps are clearly defined can the associated hazards for each step be identified, and appropriate controls be recommended. Calculating a risk score may be part of a broader risk assessment but is not the initial step of a JHA.

Question 5

An ambulatory surgery center is conducting its annual workplace violence (WPV) hazard assessment. Which of the following factors should be considered a key environmental risk factor for potential violence?

Accepted Answer

Unrestricted public access to patient care areas and poor lighting in the parking lot.

Answer

Environmental risk factors for workplace violence include physical aspects of the building and its surroundings. Unrestricted access allows potential aggressors to enter sensitive areas, and poor lighting can increase risk by concealing threats. While de-escalation training, policies, and wait times are important components of a WPV prevention program, they are considered administrative or procedural factors, not environmental ones.

CHSP - Certified Healthcare Safety Professional Practice Test

CHSP - Certified Healthcare Safety Professional Practice Test

CHSP Hazard Identification and Control Questions and Answers