Certified Phlebotomy Technician Special Specimen Collections Questions and Answers

Question 1

A phlebotomist needs to collect a specimen for a cold agglutinin test. Which of the following represents the correct handling procedure for this type of sample?

Accepted Answer

Collect the specimen in a tube that has been warmed to 37°C and keep it at body temperature until tested.

Answer

Cold agglutinins are antibodies that cause red blood cells to clump together at temperatures below body temperature. To ensure an accurate test result, the specimen must be collected in a pre-warmed tube and maintained at 37°C until the serum can be separated from the cells. Chilling the specimen would cause the agglutinins to attach to the red cells, leading to a falsely decreased result.

Question 2

A phlebotomist is collecting a blood specimen for a legal blood alcohol concentration (BAC) test. Which of the following is a critical step in this procedure?

Accepted Answer

Follow a strict chain-of-custody documentation protocol.

Answer

Specimens collected for legal purposes, such as BAC testing for a court case, require a strict chain-of-custody procedure. This provides a legal record of every person who handled the specimen from collection to analysis, ensuring its integrity and admissibility in court. While a gray-top tube is used, and consent is necessary, the chain of custody is the most critical procedural step unique to legal collections. Cleansing the site with alcohol is contraindicated as it can contaminate the specimen and falsely elevate the result.

Question 3

When performing a blood culture collection, which action is most effective in minimizing the risk of contamination from skin flora?

Accepted Answer

Scrubbing the site with an appropriate antiseptic and allowing it to fully air-dry.

Answer

Proper skin antisepsis is a critical step to prevent contamination of blood cultures with microorganisms from the skin. This involves vigorously cleaning the site and disinfecting it with an agent like chlorhexidine or iodine, and then allowing the disinfectant to dry completely before venipuncture. Failure to allow adequate drying time is a common cause of contamination.

Question 4

A phlebotomist is collecting a sample for newborn screening on a filter paper card. Which of the following actions would be grounds for specimen rejection?

Accepted Answer

Applying successive drops of blood to fill a single circle.

Answer

For a newborn screening test to be valid, each circle on the filter paper must be saturated with a single drop of blood that soaks through completely. Layering or applying successive drops of blood to the same circle can cause caking, improper saturation, and non-uniform concentration, leading to inaccurate test results and specimen rejection.

Question 5

A patient is scheduled for a glucose tolerance test (GTT). After the fasting blood sample is collected, the patient is given a glucose beverage and instructed to finish it within 5 minutes. What is the phlebotomist's MOST important responsibility regarding the timing of the subsequent draws?

Accepted Answer

Record the time the patient finishes the beverage and collect subsequent samples at the specified intervals from that time.

Answer

For a glucose tolerance test, timing is critical for accurate interpretation. The test timing begins precisely when the patient finishes consuming the glucose beverage. The phlebotomist must accurately document this time and use it as the baseline for collecting all subsequent specimens at the required intervals (e.g., 1-hour, 2-hour).

Certified Phlebotomy Technician Exam Practice Test

Certified Phlebotomy Technician Exam Practice Test

Certified Phlebotomy Technician Special Specimen Collections Questions and Answers