CER - Certified Endoscope Reprocessor Scope Inspection and Testing Questions and Answers

Question 1

A reprocessing technician is performing a dry leak test on a flexible endoscope after pre-cleaning. The pressure gauge indicates an immediate and rapid loss of pressure. What is the MOST appropriate initial action?

Accepted Answer

Check that all valves, caps, and connections to the leak tester are secure and properly seated.

Answer

Before assuming an internal failure, the most common sources of pressure loss must be ruled out. These are often user-correctable issues like a loose connection to the leak tester, an improperly seated valve, or a missing port cap. Verifying the external setup is the correct first troubleshooting step.

Question 2

During the visual inspection phase, what is the primary purpose of using a lighted magnifying glass to examine the endoscope?

Accepted Answer

To identify subtle damage such as small dents, scratches, corrosion, or buckling on the insertion tube.

Answer

A lighted magnifying glass is a critical tool for detailed visual inspection. It allows the technician to spot minor imperfections that the naked eye might miss. These small defects can compromise the integrity of the endoscope's outer surfaces and potentially harbor biofilm, making effective cleaning and disinfection difficult.

Question 3

Which of the following is a critical functional test performed after high-level disinfection and before storage to ensure the endoscope is ready for patient use?

Accepted Answer

Confirming the air/water channels are clear by observing air bubbles and water flow from the distal tip.

Answer

After reprocessing, it's essential to confirm that all channels are free from obstruction. A blockage could have been missed during cleaning or could be due to residual fluid. Testing the air/water channels ensures they are patent and functional for the next procedure, where they are used for insufflation and lens washing.

Question 4

While performing a wet leak test, a technician observes a small, consistent stream of bubbles emerging from the base of the control body. What is the immediate and most critical action to prevent further damage?

Accepted Answer

Leave the endoscope submerged and pressurized while notifying a supervisor for repair.

Answer

When a leak is found, maintaining positive internal pressure while the scope is submerged is crucial. This pressure prevents the surrounding fluid (which is considered contaminated) from entering the delicate internal mechanics and electronics of the endoscope. Removing the scope or depressurizing it would allow fluid invasion, leading to costly damage and a serious contamination risk.

Question 5

The failure to perform a leak test before immersing a flexible endoscope in enzymatic detergent poses the MOST significant risk for which of the following outcomes?

Accepted Answer

Massive fluid invasion, leading to costly internal damage and potential for cross-contamination.

Answer

Leak testing is a critical step to protect the endoscope. If an endoscope with a breach in its sheath is submerged, fluids (including bioburden and detergent) will be forced into the internal components. This causes catastrophic damage to electronics and fiber optics and creates a hidden reservoir of contamination that cannot be reached by subsequent cleaning and disinfection steps, posing a major patient safety risk.

CER - Certified Endoscope Reprocessor Practice Test

CER - Certified Endoscope Reprocessor Practice Test

CER - Certified Endoscope Reprocessor Scope Inspection and Testing Questions and Answers