CAMT - Certified Apartment Maintenance Technician Workplace Safety and Compliance Questions and Answers

Question 1

A maintenance technician is preparing to use a 20-foot extension ladder to access a second-story window. According to OSHA standards, what is the proper setup ratio for placing the base of the ladder?

Accepted Answer

The base should be 5 feet away from the wall.

Answer

OSHA requires a 4-to-1 ratio for placing non-self-supporting ladders like extension ladders. For every 4 feet of height to the point of support, the base of the ladder should be 1 foot away from the wall. In this case, for a 20-foot ladder, the base should be 5 feet away from the wall (20 / 4 = 5).

Question 2

Which of the following Personal Protective Equipment (PPE) is most critical for a technician to wear when handling a caustic drain cleaning chemical?

Accepted Answer

Splash goggles and chemical-resistant gloves.

Answer

When working with caustic chemicals that can cause severe burns upon contact with skin or eyes, the most critical PPE is protection for those areas. Splash goggles protect the eyes from splashes, and chemical-resistant gloves (like nitrile or rubber) protect the hands. While other PPE is important for other tasks, it is not the most critical for this specific hazard.

Question 3

Under OSHA's Hazard Communication Standard (HCS), employers are required to have a written program that includes a list of hazardous chemicals, employee training, and what other key component?

Accepted Answer

Readily accessible Safety Data Sheets (SDSs).

Answer

OSHA's Hazard Communication Standard mandates that employers develop and maintain a written hazard communication program. This program must include labels on containers, training for workers, and accessible Safety Data Sheets (SDSs) for every hazardous chemical in the workplace.

Question 4

A technician needs to perform maintenance on a trash compactor. After shutting down the equipment, what is the next critical step in a standard Lockout/Tagout (LOTO) procedure?

Accepted Answer

Isolate the equipment from all energy sources.

Answer

The correct sequence in a LOTO procedure after shutting down the equipment is to isolate it from all of its energy sources. This could involve flipping a circuit breaker, unplugging the unit, or closing a valve. This step ensures that the equipment cannot be accidentally re-energized while work is being performed.

Question 5

While responding to a work order, a technician discovers a small fire in a trash can containing paper and cardboard. Which class of fire extinguisher is appropriate for this situation?

Accepted Answer

Class A

Answer

Class A fire extinguishers are used for fires involving ordinary combustibles like wood, paper, cloth, and some plastics. A fire in a trash can with paper and cardboard falls directly into this category. Class C is for electrical fires, Class D is for combustible metals, and Class K is for cooking oils and fats.

CAMT - Certified Apartment Maintenance Technician Practice Test

CAMT - Certified Apartment Maintenance Technician Practice Test

CAMT - Certified Apartment Maintenance Technician Workplace Safety and Compliance Questions and Answers