CAMT - Certified Apartment Maintenance Technician Plumbing Systems and Repair Questions and Answers

Question 1

A resident reports that their toilet continuously runs after flushing. Upon inspection, you lift the tank lid and observe that the water level is above the overflow tube. Which of the following is the MOST likely cause of this issue?

Accepted Answer

A malfunctioning fill valve.

Answer

When the water level in the tank rises above the overflow tube, it indicates that the fill valve (or ballcock) is not shutting off the water supply at the correct level. This causes water to constantly drain into the overflow tube and down into the bowl, making the toilet run continuously.

Question 2

Which type of pipe is black, was one of the first plastics used in residential plumbing, and is typically used for drain, waste, and vent (DWV) systems?

Accepted Answer

ABS (Acrylonitrile Butadiene Styrene)

Answer

ABS (Acrylonitrile Butadiene Styrene) pipe is easily identified by its black color and is commonly used for drain, waste, and vent (DWV) applications. It was one of the earliest plastic pipes used in residential plumbing.

Question 3

A resident in an older apartment building complains of rusty or brown-colored water coming from their faucets. What is the most probable cause of this issue?

Accepted Answer

Corroded galvanized steel pipes.

Answer

In older buildings constructed before the 1960s, galvanized steel pipes were common. Over time, the zinc coating on these pipes erodes, causing the steel to rust from the inside. This rust can break free and discolor the water, especially when a faucet is first turned on.

Question 4

When responding to a report of a significant water leak under a kitchen sink, what should be the maintenance technician's FIRST action upon arriving at the apartment?

Accepted Answer

Shut off the water supply to the fixture using the angle stops.

Answer

The immediate priority in any active leak situation is to stop the flow of water to prevent further damage. The quickest way to do this for a single fixture is to use the local shut-off valves, often called angle stops, located on the supply lines under the sink.

Question 5

Which of the following is the recommended method for clearing a severely clogged toilet when a plunger is ineffective?

Accepted Answer

Using a toilet auger (or closet auger).

Answer

A toilet auger is a specialized tool designed to navigate the toilet's built-in trap and break up or retrieve a clog without scratching the porcelain bowl. Chemical drain cleaners are often discouraged as they can be ineffective and potentially harmful to the plumbing and the technician.

CAMT - Certified Apartment Maintenance Technician Practice Test

CAMT - Certified Apartment Maintenance Technician Practice Test

CAMT - Certified Apartment Maintenance Technician Plumbing Systems and Repair Questions and Answers