CAL - Certified Automotive Locksmith High-Security Automotive Keys Questions and Answers

Question 1

A customer's vehicle uses a high-security 'sidewinder' or 'laser-cut' key. What is the primary characteristic that distinguishes this type of key from a traditional edge-cut key?

Accepted Answer

A thicker key blade with a rectangular cross-section and cuts made into the center or side.

Answer

High-security laser-cut keys, also known as sidewinder keys, are distinguished by their thicker blades and the unique milling of a groove down the center or side of the blade, rather than having cuts on the edges. This design makes them more difficult to duplicate and provides a higher level of security.

Question 2

When programming a new transponder key to a vehicle, what is the primary function of the vehicle's immobilizer system?

Accepted Answer

To prevent the engine from starting unless a key with a recognized, pre-programmed electronic code is present.

Answer

The immobilizer is an electronic security device that allows the engine to start only when it receives a specific code from a transponder chip in the key. If the code is incorrect or not present, the immobilizer prevents the engine from running, thus thwarting theft attempts.

Question 3

A locksmith is creating a duplicate key for a 2022 vehicle that uses a 'rolling code' immobilizer system. Why can't this type of key simply be cloned by reading and copying the transponder's existing code?

Accepted Answer

The key and the vehicle generate a new, synchronized code each time the car is started, making a static copy useless.

Answer

Modern immobilizer systems often use rolling code (or hopping code) technology. In this system, the code transmitted by the transponder key changes every time it is used. The vehicle's immobilizer control unit is synchronized with the key and knows what the next code should be, making it nearly impossible to defeat by capturing and re-using a previous code.

Question 4

Which of the following tools is essential for adding a new high-security key to a modern vehicle when all original keys have been lost ('All Keys Lost' situation)?

Accepted Answer

An OBD2 key programmer and diagnostic tool.

Answer

In an 'All Keys Lost' scenario for modern vehicles, a locksmith must connect a specialized programming tool to the vehicle's On-Board Diagnostics (OBD2) port. This tool communicates directly with the car's computer (ECU) and immobilizer system to program a new transponder key, allowing it to be recognized by the vehicle.

Question 5

A customer brings you a high-security key that has a transponder chip but no remote functions. The vehicle will not start, although the key turns the ignition. The security light on the dashboard is blinking rapidly. What is the most likely cause of the issue?

Accepted Answer

The vehicle's immobilizer system is not recognizing the transponder chip.

Answer

A blinking security light typically indicates a problem with the immobilizer system's ability to authenticate the key. Since the key turns the ignition, the mechanical cut is correct. The issue lies with the electronic handshake between the transponder chip and the car's immobilizer. Keys that only have a transponder and no remote functions do not contain a battery.

(CAL) Certified Automotive Locksmith Practice Test

(CAL) Certified Automotive Locksmith Practice Test

CAL - Certified Automotive Locksmith High-Security Automotive Keys Questions and Answers