ARE - Architect Registration Examination Building Codes and Regulations Questions and Answers

Question 1

An architect is designing a four-story, 60,000 sq ft office building (Business Group B) with a full NFPA 13 sprinkler system. According to the International Building Code (IBC), which of the following construction types is the MOST restrictive type permitted for this building?

Accepted Answer

Type III-A

Answer

Based on IBC Chapter 5, allowable height and area are determined by construction type, occupancy group, and sprinkler protection. For a 4-story, 60,000 sq ft sprinklered Business Group B occupancy, Type III-A construction is a permitted option that meets the height (up to 5 stories) and area limitations. Type V-A is typically limited to fewer stories, and Type II-B has lower height limits. Type I-A would be permitted but is far less restrictive and more expensive than necessary. Therefore, III-A is the most restrictive (least fire-resistive) type that is still code-compliant.

Question 2

A restaurant space has a calculated occupant load of 120 people. According to the International Building Code (IBC) Chapter 10, what is the minimum number of exits required and what is the minimum required aggregate width for the exit doors, assuming the building is equipped with an automatic sprinkler system?

Accepted Answer

2 exits, 18 inches

Answer

IBC Chapter 10 requires a minimum of two exits for an occupant load between 50 and 500. The minimum egress width per person for a sprinklered building is 0.15 inches for level components like doors. Therefore, the total required width is 120 occupants * 0.15 inches/occupant = 18 inches. While individual door leaf clearances have minimums (typically 32 inches clear), the calculated aggregate width is 18 inches.

Question 3

In the International Building Code (IBC), which of the following best describes the primary characteristic of Type IV construction?

Accepted Answer

Exterior walls are noncombustible, and interior elements are of solid or laminated wood without concealed spaces.

Answer

Type IV construction, also known as Heavy Timber (HT), is characterized by noncombustible exterior walls and interior building elements made of solid or laminated wood of specific minimum dimensions, constructed to avoid concealed spaces. This construction type is recognized for its inherent fire resistance due to the slow-burning nature of large timber members.

Question 4

An architect is designing a new multi-story building and must provide an accessible means of egress. Which of the following is NOT a permissible component of an accessible means of egress according to the IBC?

Accepted Answer

A standard passenger elevator without standby power.

Answer

A standard passenger elevator without standby power and other specific life-safety features cannot be considered part of an accessible means of egress. Accessible means of egress require components that are usable by people with disabilities during an emergency, such as areas of refuge, horizontal exits, and specially designated evacuation elevators with standby power.

Question 5

Which of the following fire-resistive assemblies is required by the IBC to be continuous from the foundation to or through the roof and be structurally stable enough to allow collapse of construction on either side without the assembly itself collapsing?

Accepted Answer

Fire Wall

Answer

A Fire Wall is a fire-resistance-rated wall that extends continuously from the foundation to or through the roof. It is designed with sufficient structural stability to remain standing even if the construction on one side collapses during a fire. This allows it to be treated as a separate building for code purposes like allowable area calculations.

ARE - Architect Registration Examination Practice Test

ARE - Architect Registration Examination Practice Test

ARE - Architect Registration Examination Building Codes and Regulations Questions and Answers