ARE - Architect Registration Examination Building Codes and Regulations Questions and Answers — Questions and Answers
Question 1: An architect is designing a four-story, 60,000 sq ft office building (Business Group B) with a full NFPA 13 sprinkler system. According to the International Building Code (IBC), which of the following construction types is the MOST restrictive type permitted for this building?
- Type V-A
- Type III-A (Correct answer)
- Type II-B
- Type I-A
Correct answer: Type III-A
Based on IBC Chapter 5, allowable height and area are determined by construction type, occupancy group, and sprinkler protection. For a 4-story, 60,000 sq ft sprinklered Business Group B occupancy, Type III-A construction is a permitted option that meets the height (up to 5 stories) and area limitations. Type V-A is typically limited to fewer stories, and Type II-B has lower height limits. Type I-A would be permitted but is far less restrictive and more expensive than necessary. Therefore, III-A is the most restrictive (least fire-resistive) type that is still code-compliant.
Question 2: A restaurant space has a calculated occupant load of 120 people. According to the International Building Code (IBC) Chapter 10, what is the minimum number of exits required and what is the minimum required aggregate width for the exit doors, assuming the building is equipped with an automatic sprinkler system?
- 1 exit, 36 inches
- 2 exits, 24 inches
- 2 exits, 18 inches (Correct answer)
- 3 exits, 45 inches
Correct answer: 2 exits, 18 inches
IBC Chapter 10 requires a minimum of two exits for an occupant load between 50 and 500. The minimum egress width per person for a sprinklered building is 0.15 inches for level components like doors. Therefore, the total required width is 120 occupants * 0.15 inches/occupant = 18 inches. While individual door leaf clearances have minimums (typically 32 inches clear), the calculated aggregate width is 18 inches.
Question 3: In the International Building Code (IBC), which of the following best describes the primary characteristic of Type IV construction?
- Structural elements are of noncombustible materials like steel and concrete.
- Exterior walls are noncombustible, and interior elements are of solid or laminated wood without concealed spaces. (Correct answer)
- Exterior and interior building elements are of any material permitted by the code, including light-wood frame.
- Exterior walls are noncombustible, and interior elements are of any material permitted by the code, which may have concealed spaces.
Correct answer: Exterior walls are noncombustible, and interior elements are of solid or laminated wood without concealed spaces.
Type IV construction, also known as Heavy Timber (HT), is characterized by noncombustible exterior walls and interior building elements made of solid or laminated wood of specific minimum dimensions, constructed to avoid concealed spaces. This construction type is recognized for its inherent fire resistance due to the slow-burning nature of large timber members.
Question 4: An architect is designing a new multi-story building and must provide an accessible means of egress. Which of the following is NOT a permissible component of an accessible means of egress according to the IBC?
- An interior area of refuge with two-way communication.
- A horizontal exit to an adjacent building.
- An exterior area for assisted rescue.
- A standard passenger elevator without standby power. (Correct answer)
Correct answer: A standard passenger elevator without standby power.
A standard passenger elevator without standby power and other specific life-safety features cannot be considered part of an accessible means of egress. Accessible means of egress require components that are usable by people with disabilities during an emergency, such as areas of refuge, horizontal exits, and specially designated evacuation elevators with standby power.
Question 5: Which of the following fire-resistive assemblies is required by the IBC to be continuous from the foundation to or through the roof and be structurally stable enough to allow collapse of construction on either side without the assembly itself collapsing?
- Fire Partition
- Smoke Barrier
- Fire Wall (Correct answer)
- Fire Barrier
Correct answer: Fire Wall
A Fire Wall is a fire-resistance-rated wall that extends continuously from the foundation to or through the roof. It is designed with sufficient structural stability to remain standing even if the construction on one side collapses during a fire. This allows it to be treated as a separate building for code purposes like allowable area calculations.
Question 6: When designing for accessibility, an architect must reconcile requirements from the Americans with Disabilities Act (ADA) and the International Building Code (IBC). Which statement is TRUE regarding the relationship between these two documents?
- The ADA is a building code, while the IBC is a federal civil rights law.
- If a conflict exists, the requirements of the ADA always supersede the IBC.
- The IBC's accessibility requirements are found in Chapter 11 and often reference the ICC A117.1 standard for technical criteria. (Correct answer)
- An architect only needs to comply with the local building code (IBC), as it includes all ADA requirements.
Correct answer: The IBC's accessibility requirements are found in Chapter 11 and often reference the ICC A117.1 standard for technical criteria.
The ADA is a federal civil rights law, not a building code. The IBC is a model building code. Architects must comply with both. In case of a conflict, the most stringent requirement must be followed. The IBC contains its scoping requirements for accessibility in Chapter 11, which then refers to the ICC A117.1 standard for detailed technical provisions (how to build it).
ARE - Architect Registration Examination Building Codes and Regulations Questions and Answers
An architect is designing a four-story, 60,000 sq ft office building (Business Group B) with a full NFPA 13 sprinkler system.
According to the International Building Code (IBC), which of the following construction types is the MOST restrictive type permitted for this building?