OSP Codes Compliance & Project Documentation 2

Question 1

Which OSHA standard specifically governs excavation and trenching safety for OSP construction crews?

Accepted Answer

29 CFR 1926 Subpart P

Answer

OSHA 29 CFR 1926 Subpart P covers excavations and trenching safety requirements for construction work.

Question 2

A redline markup on an as-built drawing indicates:

Accepted Answer

An actual field deviation from the design drawing

Answer

Redline markups on as-built drawings record actual field conditions or deviations that differ from the original design.

Question 3

Under the National Electrical Safety Code (NESC), what is the minimum horizontal clearance between communication cables and power lines of 750V to 22kV on joint-use poles?

Accepted Answer

30 inches

Answer

NESC requires a minimum 30-inch horizontal clearance between communication cables and power lines in the 750V–22kV range on joint-use structures.

Question 4

A permit-to-work (PTW) document for OSP work primarily serves to:

Accepted Answer

Control and communicate hazards before work begins

Answer

A permit-to-work formally identifies hazards, required precautions, and authorizes personnel to perform specific tasks safely.

Question 5

When a project requires work within a railroad right-of-way, which document is typically required before construction begins?

Accepted Answer

Railroad Flagging Agreement or Encroachment Permit

Answer

Railroads require a flagging agreement or encroachment permit to control worker safety and liability within their right-of-way.

(OSP) Outside Plant Designer Practice Test

(OSP) Outside Plant Designer Practice Test

OSP Codes Compliance & Project Documentation 2