← All OSHA Flashcard Decks

Lockout/Tagout Procedures Flashcards

6 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Lockout/Tagout Procedures flashcards as text
  1. An 'affected employee' under the Lockout/Tagout standard becomes an 'authorized employee' when which of the following occurs?

    Answer: Their duties are expanded to include servicing or maintaining the equipment.

    According to OSHA 29 CFR 1910.147(b), an affected employee becomes an authorized employee when their duties are expanded to include performing servicing or maintenance on the machine or equipment that requires lockout or tagout.

  2. According to OSHA 29 CFR 1910.147, how often must an employer conduct and certify periodic inspections of their energy control procedures?

    Answer: At least annually.

    OSHA standard 1910.147(c)(6)(i) mandates that employers must conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of the standard are being followed.

  3. A maintenance worker is performing a minor tool change during normal production operations. This activity is routine, repetitive, and integral to production. Under which condition would this task be EXEMPT from full Lockout/Tagout procedures?

    Answer: The work is performed using alternative measures that provide effective protection.

    OSHA's LOTO standard includes an exception for minor tool changes and adjustments during normal production if they are routine, repetitive, and integral to production, provided that alternative measures are used which provide effective protection.

  4. During a periodic inspection of a tagout procedure, who must the inspector review the employee's responsibilities with?

    Answer: Each authorized employee and each affected employee.

    OSHA 1910.147(c)(6)(i)(D) specifies that when tagout is used, the periodic inspection must include a review between the inspector and each authorized AND affected employee. This is more stringent than for lockout-only inspections due to the nature of tags as warning devices.

  5. Which of the following is a mandatory step in the sequence for releasing equipment from Lockout/Tagout after servicing is complete?

    Answer: Inspect the area to ensure nonessential items are removed and equipment is intact.

    OSHA 1910.147(e) outlines the steps for release from LOTO. A key step before removing LOTO devices is to inspect the work area to ensure that nonessential items have been removed and that machine or equipment components are operationally intact.

  6. An employer has a piece of equipment with a single, easily identifiable energy source that can be completely de-energized by isolating it. When is this employer exempt from needing a FORMAL, documented energy control procedure for this specific machine?

    Answer: When a set of eight specific criteria, including the use of a single lockout device under the employee's exclusive control, are all met.

    OSHA 1910.147(c)(4)(i) provides an exception to the requirement for a documented procedure when eight specific criteria are met. These include having a single energy source, complete de-energization, a single lockout device under exclusive control, and no potential for stored energy, among others.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. osha.gov — Score validity, test delivery, eligibility, passing score, renewal, retake policy, score release · verified Nov 2026