← All OSHA Flashcard Decks

OSHA - Safety Certificate Walking and Working Surfaces Questions and Answers Flashcards

6 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 OSHA - Safety Certificate Walking and Working Surfaces Questions and Answers flashcards as text
  1. Which OSHA standard specifically addresses the requirements for walking-working surfaces in general industry?

    Answer: 29 CFR 1910 Subpart D

    Subpart D of 29 CFR 1910 covers walking-working surfaces for general industry workplaces.

  2. What is the employer's responsibility regarding drainage on walking-working surfaces where wet processes are used?

    Answer: Drainage must be maintained or dry standing places must be provided

    OSHA requires drainage or dry standing places where wet processes are used per 29 CFR 1910.22(a)(2).

  3. When must guardrail systems be installed on walking-working surfaces?

    Answer: On any open-sided surface 4 feet or more above a lower level

    Guardrails are required on unprotected sides and edges of walking-working surfaces 4 feet or more above a lower level.

  4. What is the minimum height requirement for a standard guardrail top rail under OSHA general industry standards?

    Answer: 42 inches

    OSHA requires top rails to be 42 inches plus or minus 3 inches above the walking-working surface per 29 CFR 1910.29.

  5. Which of the following conditions would constitute a violation of OSHA walking-working surface standards?

    Answer: Allowing tools and materials to accumulate on a stairway passage

    Accumulation of tools and materials on stairways creates tripping hazards and violates housekeeping requirements.

  6. What does OSHA require regarding the condition of permanent aisles and passageways?

    Answer: They must be appropriately marked where mechanical handling equipment is used

    OSHA requires permanent aisles and passageways to be appropriately marked where mechanical handling equipment is used per 29 CFR 1910.22(b).

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. osha.gov — Score validity, test delivery, eligibility, passing score, renewal, retake policy, score release · verified Nov 2026