OSHA - Safety Certificate Lockout/Tagout Procedures Questions and Answers Flashcards
6 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 OSHA - Safety Certificate Lockout/Tagout Procedures Questions and Answers flashcards as text
What information must be included on a tagout device according to OSHA's LOTO standard?
Answer: The identity of the employee who applied it
Tagout devices must clearly identify the employee who applied the device so that it is clear who is responsible for its removal.
When a shift change occurs during a lockout/tagout procedure, what is the required protocol?
Answer: The outgoing employee's lock must be removed and the incoming employee must apply their own lock in an orderly transfer
OSHA requires an orderly transfer of lockout/tagout devices during shift changes so that continuity of protection is maintained at all times.
Which type of energy is considered 'stored' or 'residual' energy in LOTO procedures?
Answer: Energy remaining in a system after isolation, such as compressed springs or pressurized lines
Stored or residual energy includes any energy that remains in the system after the primary energy source has been isolated, such as compressed springs, elevated components, or pressurized fluids.
What is the role of a 'group lockout/tagout' procedure?
Answer: To provide protection when multiple authorized employees are servicing the same equipment simultaneously
Group lockout/tagout procedures ensure that each authorized employee working on the same equipment is afforded the same level of protection as they would under an individual LOTO procedure.
An energy-isolating device must meet which requirement to be considered 'capable of being locked out'?
Answer: It must have a hasp or other attachment point to which a lock can be affixed
An energy-isolating device is capable of being locked out if it has a hasp, hole, or other means of attachment to which a lock can be affixed to hold it in the safe position.
What must an employer do if an authorized employee who applied a LOTO device is not available to remove it?
Answer: Follow a specific procedure that includes verifying the employee is not at the facility, making reasonable efforts to contact them, and ensuring the employee knows the device was removed before they resume work
OSHA allows lock removal by someone other than the authorized employee only under a specific documented procedure that includes verification, contact attempts, and notification before the employee resumes work.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- osha.gov — Score validity, test delivery, eligibility, passing score, renewal, retake policy, score release · verified Nov 2026