OSHA OSHA - Safety Certificate Personal Protective Equipment (PPE) Questions and Answers 2 — Questions and Answers
Question 1: Under OSHA standards, who is responsible for paying for required personal protective equipment?
- The employee
- The employer (Correct answer)
- The insurance provider
- OSHA directly
Correct answer: The employer
OSHA requires employers to provide and pay for PPE that is necessary to protect employees from workplace hazards.
Question 2: Which type of PPE is specifically required when working with chemicals that may splash?
- Steel-toed boots
- Chemical splash goggles (Correct answer)
- Hard hat
- Hearing protection
Correct answer: Chemical splash goggles
Chemical splash goggles create a seal around the eyes to prevent hazardous liquids from reaching them during splash events.
Question 3: What must an employer do before selecting PPE for their workers?
- Purchase the least expensive option available
- Conduct a workplace hazard assessment (Correct answer)
- Ask employees to bring their own equipment
- File a report with OSHA
Correct answer: Conduct a workplace hazard assessment
OSHA requires employers to perform a hazard assessment to identify workplace dangers and determine the appropriate PPE needed.
Question 4: When should a fall protection harness be removed from service?
- After five years regardless of condition
- Only when the manufacturer recalls it
- After it has been subjected to fall arrest forces (Correct answer)
- When the supervisor decides it looks old
Correct answer: After it has been subjected to fall arrest forces
A harness that has arrested a fall may have stretched or sustained invisible damage to its fibers and must be removed from service immediately.
Question 5: Which OSHA standard specifically covers PPE requirements for general industry?
- 29 CFR 1926.100
- 29 CFR 1910.132 (Correct answer)
- 29 CFR 1904.7
- 29 CFR 1915.152
Correct answer: 29 CFR 1910.132
29 CFR 1910.132 establishes the general requirements for PPE in general industry workplaces, including hazard assessment and equipment selection.
Question 6: What is the primary purpose of a fit test for respiratory protection?
- To determine the employee's lung capacity
- To verify the respirator creates an adequate seal on the wearer's face (Correct answer)
- To check if the respirator filter is functioning
- To measure airborne contaminant levels
Correct answer: To verify the respirator creates an adequate seal on the wearer's face
Fit testing ensures the respirator forms a proper seal against the wearer's face so contaminated air cannot leak into the breathing zone.
OSHA OSHA - Safety Certificate Personal Protective Equipment (PPE) Questions and Answers 2
Under OSHA standards, who is responsible for paying for required personal protective equipment?