← All OHST Flashcard Decks

Industrial Hygiene & Exposure Assessment Flashcards

7 cards from real OHST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Industrial Hygiene & Exposure Assessment flashcards as text
  1. What does the acronym TLV-TWA stand for in industrial hygiene?

    Answer: Threshold Limit Value - Time-Weighted Average

    TLV-TWA stands for Threshold Limit Value - Time-Weighted Average, representing the average airborne concentration for a normal 8-hour workday published by ACGIH.

  2. Which organization publishes Permissible Exposure Limits (PELs) that are legally enforceable in U.S. workplaces?

    Answer: OSHA

    OSHA publishes PELs as legally enforceable federal standards under the Occupational Safety and Health Act.

  3. What is the purpose of the Short-Term Exposure Limit (STEL)?

    Answer: To set the maximum concentration for a 15-minute period not to be exceeded

    The STEL is the maximum concentration to which workers can be exposed for up to 15 minutes without suffering acute adverse effects.

  4. The designation 'IDLH' in industrial hygiene represents a concentration that is:

    Answer: Immediately Dangerous to Life or Health

    IDLH (Immediately Dangerous to Life or Health) is a NIOSH value representing the maximum concentration from which one could escape without irreversible health effects.

  5. Which route of entry is typically the primary concern for most airborne industrial chemicals?

    Answer: Inhalation

    Inhalation is the primary exposure route for airborne chemicals because the lungs provide a large surface area and rapid transfer into the bloodstream.

  6. An industrial hygienist conducting a 'worst-case' exposure assessment assumes:

    Answer: Maximum anticipated exposures under the most demanding work conditions

    Worst-case assessments evaluate peak exposures under the most demanding conditions to ensure controls remain protective even at maximum foreseeable levels.

  7. What is the primary purpose of an Occupational Exposure Limit (OEL)?

    Answer: To protect nearly all workers from adverse health effects with repeated daily exposure

    OELs are designed to protect the vast majority of workers from adverse health effects when exposed repeatedly over an entire working lifetime.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. bcsp.org — Renewal, time limit, eligibility, fees, registration, retake policy, score release, test dates, score validity, exam format · verified Oct 2026
  2. pearsonvue.com — Test delivery · verified Oct 2026
Industrial Hygiene & Exposure Assessment Flashcards — OHST Study Cards with Answers