NWCO - Nuisance Wildlife Control Operator Trapping and Capture Methods 2

Question 1

What is the primary advantage of a double-door cage trap versus single-door for raccoon capture?

Accepted Answer

The see-through design reduces trap-shy behavior

Answer

Double-door traps create a see-through appearance that reduces trap-shy behavior because the animal sees through the trap rather than into a dead-end.

Question 2

What is the maximum trap check interval required by most states for cage traps?

Accepted Answer

24 hours

Answer

Most states require cage traps to be checked at least every 24 hours to prevent animal suffering.

Question 3

What is the optimal trap orientation for catching a groundhog near its burrow?

Accepted Answer

Aligned with the burrow entrance, flush against the opening with guide logs

Answer

Positioning flush with the burrow opening with guide logs funneling the animal into the trap maximizes capture probability.

Question 4

What is the purpose of pre-baiting a trap location before setting the mechanism?

Accepted Answer

To condition the target animal to feed freely before activating, increasing capture success

Answer

Pre-baiting conditions the target animal to associate the trap with food, reducing wariness and increasing capture probability.

Question 5

Which trap type is specifically designed for capturing snakes?

Accepted Answer

Glue board trap or minnow trap with funnel entrance

Answer

Glue boards and modified minnow traps are standard snake capture tools, as conventional mammal traps are ineffective for snakes.

NWCO - Nuisance Wildlife Control Operator Practice Test

NWCO - Nuisance Wildlife Control Operator Practice Test

NWCO - Nuisance Wildlife Control Operator Trapping and Capture Methods 2