Practice Test GeeksNOCTI - National Occupational Competency Testing Institute Practice Test
← All NOCTI Flashcard Decks

Workplace Safety Procedures Flashcards

6 cards from real NOCTI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Workplace Safety Procedures flashcards as text

  1. An employee is preparing to perform maintenance on a piece of machinery. According to standard Lockout/Tagout (LOTO) procedures, what is the critical first step they must take?

    Answer: Investigate and understand all forms of hazardous energy associated with the machine.

    The preparation phase is the first crucial step in the LOTO procedure. It involves the authorized employee identifying and understanding all potential hazardous energy sources that need to be controlled before any other action is taken.

  2. While using a portable fire extinguisher, an individual should follow the P.A.S.S. acronym. What does the 'A' in P.A.S.S. stand for?

    Answer: Aim the nozzle at the base of the fire.

    The P.A.S.S. method for using a fire extinguisher stands for Pull, Aim, Squeeze, and Sweep. The 'Aim' step is critical for effectiveness, as the extinguishing agent must be directed at the fuel source at the base of the fire, not the flames themselves.

  3. A new cleaning solvent is introduced in the workplace. Which document is the primary source for detailed information about the chemical's hazards, handling precautions, and necessary personal protective equipment (PPE)?

    Answer: The Safety Data Sheet (SDS).

    The Safety Data Sheet (SDS), formerly known as MSDS, is required by OSHA's Hazard Communication Standard. It provides comprehensive information on hazardous chemicals, including identification, hazards, composition, first-aid measures, handling, storage, and required PPE.

  4. Which of the following is a required element of an OSHA-compliant Emergency Action Plan (EAP)?

    Answer: Procedures to account for all employees after an evacuation.

    According to OSHA standard 29 CFR 1910.38, a core component of an Emergency Action Plan is establishing procedures to account for all employees after an emergency evacuation has been completed to ensure everyone has gotten out safely.

  5. A worker is tasked with cleaning a large, unguarded mixing vat. Before they begin, the maintenance supervisor ensures the main electrical breaker is switched off and places a lock on it with their personal tag. What safety procedure is being followed?

    Answer: Lockout/Tagout (LOTO)

    This scenario describes the Lockout/Tagout (LOTO) procedure. LOTO is a safety practice that ensures dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or servicing work.

  6. According to OSHA, an employer's general duty is to provide a workplace that is free from what?

    Answer: Serious recognized hazards.

    The General Duty Clause of the OSH Act requires employers to provide a workplace that is "free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees." This is a foundational principle of workplace safety.