Special Occupancies & Hazardous Locations Flashcards
7 cards from real NEC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Special Occupancies & Hazardous Locations flashcards as text
In Class I, Division 1 hazardous locations, what general type of electrical equipment is required for most fixed wiring applications?
Answer: Explosion-proof or intrinsically safe listed equipment
Class I, Division 1 locations require explosion-proof or intrinsically safe equipment to prevent any electrical arc or heat from igniting the surrounding flammable atmosphere.
NEC Article 547 provides electrical wiring requirements for which type of special occupancy?
Answer: Agricultural buildings
Article 547 covers agricultural buildings, addressing unique hazards such as combustible dust, corrosive atmospheres, and high moisture levels found in farm structures.
What is the primary purpose of equipotential bonding required by NEC 680.26 in and around swimming pool areas?
Answer: To minimize voltage gradients in and around the pool area
Equipotential bonding per NEC 680.26 minimizes voltage differences between conductive surfaces in the pool area, preventing voltage gradient hazards that could cause electric shock or electrocution.
Which NEC article specifically governs electrical installations at motor fuel dispensing facilities such as gasoline stations?
Answer: Article 514
Article 514 covers motor fuel dispensing facilities including gasoline stations, propane dispensing, and compressed natural gas dispensing locations.
NEC Article 700 covers which category of backup electrical system?
Answer: Emergency systems
Article 700 covers emergency systems required by law to automatically supply power to life-safety loads during a utility failure, such as exit lighting and fire alarm systems.
Under NEC 517.13(B), branch circuits serving patient care spaces must include what in addition to the metal raceway to provide redundant grounding?
Answer: An insulated copper equipment grounding conductor
NEC 517.13(B) requires an insulated copper equipment grounding conductor in addition to the metal raceway, providing two independent grounding paths in patient care spaces for maximum safety.
Per NEC Article 500, how is 'intrinsically safe' equipment defined for use in hazardous locations?
Answer: Equipment incapable of releasing sufficient energy to ignite a specific hazardous atmosphere
Intrinsically safe equipment is designed so that under both normal and fault conditions it cannot release enough electrical or thermal energy to ignite a specific hazardous atmosphere.