NEBOSH Manual Handling and Construction Safety

Question 1

What factors are assessed in a manual handling risk assessment using the TILEO framework?

Accepted Answer

Task (actions involved), Individual (worker capability, health), Load (weight, size, stability, temperature), Environment (space, floor, temperature), Other (PPE, training)

Answer

Time, Intensity, Location, Equipment, Operations

Answer

Total, Injuries, Limits, Exposure, Operations

Answer

Temperature, Impact, Load, Ergonomics, Overexertion

Question 2

What is the correct manual handling technique for lifting a heavy box from floor level?

Accepted Answer

Plan the lift, close to the body, feet shoulder-width apart, bend knees (not back), straight back, smooth controlled movement, avoid twisting — turn feet not back

Answer

Bend at the waist with straight legs

Answer

Twist the back to place the load to the side

Answer

Always lift with one hand to keep the other free

Question 3

What is 'team lifting' and when is it required?

Accepted Answer

Coordinated lifting by two or more workers when a load is too heavy or awkward for safe solo lifting — requires a designated leader, synchronized movement, and all participants of sufficient height/strength

Answer

Team lifting is only required for loads over 50 kg

Answer

Team lifting is always safer than using mechanical aids

Answer

Any two workers can team lift without prior coordination

Question 4

What are the main causes of fatal accidents in Gulf construction?

Accepted Answer

Falls from height, struck by vehicle or plant, collapse of excavations or structures, electrical contact, and crane/lifting equipment failures — accounting for the majority of construction fatalities

Answer

Only falls from height cause fatalities

Answer

Construction fatalities are primarily from chemical exposure

Answer

Falls from height account for all construction deaths

Question 5

What is required before work begins below overhead power lines on a Gulf construction site?

Accepted Answer

Identify line voltage, establish statutory minimum clearance distances, use goal posts or barriers to prevent over-height plant access, consider diversion or de-energization, and brief all site personnel

Answer

Overhead power lines can be touched if work is brief

Answer

Standard safety boots protect against overhead line contact

Answer

Only cranes need to maintain clearance from overhead lines

Question 6

What is 'CDM' (Construction Design and Management) regulation and how does it apply in the Gulf context?

Accepted Answer

CDM places duties on clients, designers, and contractors to consider H&S at every stage of a project — from design through construction to maintenance. Gulf countries have equivalent project safety regulations requiring pre-construction safety planning.

Answer

CDM only applies to projects in the UK

Answer

CDM regulates financial management of construction projects

Answer

CDM only applies during the construction phase — not design