Monitoring and Review Flashcards
6 cards from real NEBOSH practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Monitoring and Review flashcards as text
What is the primary difference between active and reactive monitoring in health and safety management?
Answer: Active monitoring checks that safety standards are being met before things go wrong, while reactive monitoring analyses events after they have occurred
Active monitoring involves proactive checks to verify that safety controls and standards are in place and working before incidents occur (safety tours, inspections, audits). Reactive monitoring analyses events that have already happened (accidents, near-misses, ill-health) to identify what went wrong and prevent recurrence.
Which of the following is an example of active monitoring?
Answer: Conducting a planned safety inspection of machinery guarding
A planned safety inspection of machinery guarding is active monitoring — it proactively checks that a safety control is in place and working correctly before an incident occurs. The other options are all reactive, as they respond to events (accidents, ill health, incidents) that have already happened.
What is the difference between a safety tour and a safety inspection?
Answer: A safety tour is a general walk-through observation of an area, while a safety inspection is a more detailed, systematic examination against specific criteria or checklists
A safety tour is typically a less formal walk-through of a work area to observe general conditions, housekeeping, and worker behaviour. A safety inspection is more structured and systematic, using checklists or criteria to examine specific equipment, processes, or conditions in detail against defined standards.
What is a leading indicator in health and safety performance measurement?
Answer: A measure of safety activities and inputs that aim to prevent incidents, such as the percentage of risk assessments completed or training sessions delivered
Leading indicators measure proactive safety activities and inputs — things done to prevent incidents before they occur. Examples include training completion rates, inspection frequency, hazard reports submitted, and risk assessment coverage. They contrast with lagging indicators which measure outcomes after events.
What is the purpose of safety sampling as an active monitoring technique?
Answer: To observe a random sample of work activities, behaviours, or conditions at a specific time to assess compliance with safety standards
Safety sampling involves observing a random selection of work activities, behaviours, or workplace conditions at a particular point in time. It provides a snapshot of safety performance across the organisation and can identify patterns of non-compliance without the resource demands of a full inspection.
Which of the following is a lagging indicator of health and safety performance?
Answer: The lost-time injury frequency rate over the past 12 months
The lost-time injury frequency rate is a lagging indicator because it measures outcomes — injuries that have already occurred. Lagging indicators look backwards at failures. The other options are all leading indicators as they measure proactive safety activities and inputs designed to prevent incidents.