NEBOSH Working at Height 2

Question 1

What does the acronym MEWP stand for in the context of work at height equipment?

Accepted Answer

Mobile Elevating Work Platform

Answer

Mobile Emergency Work Platform

Answer

Mechanical Elevated Working Position

Answer

Multi-Extension Working Pod

Question 2

When operating a Mobile Elevating Work Platform (MEWP), which precaution is essential before elevating the platform?

Accepted Answer

Deploy outriggers and stabilisers where required by the manufacturer

Answer

Ensure the engine is switched off

Answer

Remove the fall arrest harness to allow freedom of movement

Answer

Confirm the ground slope does not exceed 30 degrees

Question 3

A fall arrest system is intended to do which of the following?

Accepted Answer

Limit the consequences of a fall that has already occurred

Answer

Prevent a worker from reaching the edge of a working platform

Answer

Stop a worker from falling at all

Answer

Replace the need for guardrails on all scaffold systems

Question 4

What is the most critical factor to check on a safety harness before each use?

Accepted Answer

That all webbing, buckles, and stitching show no signs of damage or wear

Answer

That it is the correct brand approved by the manufacturer

Answer

That it has been cleaned within the previous 30 days

Answer

That it is stored in a UV-proof bag

Question 5

In the Gulf region, why is it particularly important to inspect working at height equipment more frequently than in cooler climates?

Accepted Answer

Because high UV radiation and extreme heat can degrade synthetic materials faster

Answer

Because Gulf workers are less experienced with height work

Answer

Because Gulf regulations require daily inspections regardless of conditions

Answer

Because dust storms make ladders heavier and harder to handle

Question 6

What does 'rescue planning' mean in the context of working at height?

Accepted Answer

Having a pre-planned method to retrieve a worker who has fallen and is suspended in a harness

Answer

Training workers to escape from a building during a fire

Answer

Installing emergency exits at each level of a scaffold

Answer

Ensuring first aid kits are placed at the top of every access tower

Question 7

Which of the following working at height tasks would be MOST suitable for a podium step rather than a traditional stepladder?

Accepted Answer

Performing a brief, stable overhead task such as fitting a ceiling tile

Answer

Accessing a roof to carry out extensive repair work over several days

Answer

Reaching an anchor point 8 metres above floor level

Answer

Crossing an excavation to inspect trench walls