Fire Safety Management Flashcards
6 cards from real NEBOSH practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Fire Safety Management flashcards as text
What are the three elements of the fire triangle?
Answer: Heat, fuel, and oxygen
The fire triangle consists of heat (ignition source), fuel (combustible material), and oxygen (oxidising agent). All three elements must be present simultaneously for a fire to start and continue burning. Removing any one element will extinguish or prevent the fire.
How many key steps are involved in a fire risk assessment as outlined in UK fire safety guidance?
Answer: 5 steps
A fire risk assessment follows 5 key steps: (1) identify fire hazards (sources of ignition, fuel, and oxygen), (2) identify people at risk, (3) evaluate, remove or reduce risks and protect against remaining risk, (4) record findings, prepare an emergency plan and provide training, (5) review and update regularly.
What colour band identifies a water fire extinguisher in the UK?
Answer: Signal red with no colour band (all red body)
Under BS EN 3, a water extinguisher has an all-red body with no additional colour band. It is the only extinguisher type that is entirely red. Other types have a red body with a coloured band: cream for foam, black for CO2, blue for dry powder, and yellow for wet chemical.
What is the maximum recommended travel distance to the nearest fire exit in a room with a single escape route in a normal-risk area?
Answer: 18 metres
In normal-risk premises with a single direction of escape (dead-end situation), the maximum recommended travel distance is 18 metres. Where alternative escape routes are available, this increases to 45 metres. High-risk areas have reduced distances of 12m (single) and 25m (alternative routes).
Which type of fire detection system uses devices that respond to the products of combustion such as smoke particles?
Answer: Smoke detection system (ionisation or optical detectors)
Smoke detectors respond to the products of combustion. Ionisation detectors are more sensitive to small smoke particles from fast-flaming fires, while optical (photoelectric) detectors are better at detecting larger particles from slow-smouldering fires. Both provide early warning before flames fully develop.
What is the primary purpose of a fire emergency plan in the workplace?
Answer: To provide a clear set of procedures for ensuring the safe evacuation of all persons in the event of fire
A fire emergency plan sets out the actions to be taken by staff and others in the event of a fire, including how to raise the alarm, evacuation procedures, assembly points, duties of fire wardens/marshals, procedures for disabled persons, and liaison arrangements with the fire and rescue service.