OSHA Crane Regulations 29 CFR 1926 Flashcards
6 cards from real NCCCO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 OSHA Crane Regulations 29 CFR 1926 flashcards as text
Under OSHA 29 CFR 1926.1427, crane operators on construction sites must be qualified or certified by what means?
Answer: Certification by an accredited testing organization, qualification by an audited employer program, qualification by the U.S. military, or a qualifying state or local licensing program
OSHA 1926.1427 allows operator qualification or certification through four pathways: accredited testing organization certification, audited employer qualification program, U.S. military qualification, or a qualifying state or local licensing program.
What does OSHA 29 CFR 1926.1408 specify regarding the minimum safe distance from energized power lines during crane operations?
Answer: Minimum distances depend on line voltage: 10 feet for lines up to 50 kV, with additional distance for higher voltages, unless the utility owner de-energizes or installs insulating guards
OSHA 1926.1408 specifies minimum distances based on line voltage: 10 feet for lines up to 50 kV, 10 feet plus 4 inches for each additional 10 kV above 50 kV, or the line must be de-energized, relocated, or guarded.
Under OSHA 29 CFR 1926.1402, who is responsible for ensuring the ground conditions are adequate for crane setup?
Answer: The employer, with a qualified person assessing ground conditions, and the controlling entity providing ground condition information to the crane employer
OSHA 1926.1402 requires the controlling entity (general contractor or project owner) to inform the crane employer of ground conditions, and requires the crane employer and a qualified person to assess adequacy before setup.
What does OSHA 29 CFR 1926.1413 require regarding wire rope inspections?
Answer: A visual inspection of all running and standing wire ropes must be performed before each shift, with more thorough monthly inspections by a qualified person
OSHA 1926.1413 requires a pre-shift visual inspection of all ropes by the operator, and monthly inspections by a qualified person, with documented records. Specific criteria for removal from service are provided.
Under OSHA 29 CFR 1926.1430, what training is required for crane operators beyond basic certification?
Answer: Operators must receive site-specific training and familiarization for each crane model and site conditions before operating on a new site or with unfamiliar equipment
OSHA 1926.1430 requires employers to ensure operators receive training on the specific equipment model they will operate, site-specific conditions, and the content of applicable standards. Certification alone is insufficient for unfamiliar equipment or sites.
What does OSHA 29 CFR 1926.1424 require when a crane must travel with a suspended load?
Answer: Travel is permitted only if the manufacturer approves it, the load is kept close to the ground, a qualified person supervises, and specific conditions are met including boom position and travel surface assessment
OSHA 1926.1424 permits traveling with a load only with manufacturer approval, under supervision of a qualified person, with specific controls including load height restrictions, boom position requirements, and travel surface evaluation.