PV System Mechanical Installation Flashcards
6 cards from real NABCEP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 PV System Mechanical Installation flashcards as text
When installing a PV array on a composite shingle roof, what is the primary purpose of using flashing at each roof penetration?
Answer: To divert water away from the penetration point and prevent leaks.
Flashing is a critical component for weatherproofing roof penetrations. It is installed over the L-foot or standoff and integrated with the roofing material (shingles) to create a watershed that directs water away from the hole created for the lag screw, thereby preventing water intrusion and potential roof leaks.
An installer is using a torque wrench to tighten the M8 bolts on the mid-clamps securing PV modules to the racking system. The racking manufacturer's instructions specify a torque value, but the module installation manual provides a different, lower torque range. Which torque specification should the installer follow?
Answer: The torque specification from the PV module manufacturer.
The PV module frame is the more sensitive component. Overtightening the clamps can deform the module frame, create stress points on the glass, and potentially void the module warranty. Therefore, the installer must adhere to the torque values specified by the module manufacturer to avoid damaging the product.
Which of the following is a key requirement when using a UL 2703 listed mounting system to bond the PV modules together?
Answer: The system must be installed precisely according to the manufacturer's instructions.
A UL 2703 listing certifies that a racking system and its components provide a reliable bonding path when installed as a complete system. This certification is contingent upon following the manufacturer's specific installation instructions, which detail how components like clamps and splices create the electrical bond. Deviating from these instructions can compromise the integrity of the bonding path.
A PV system is being installed on a roof in a region with high snow loads. According to ASCE 7 standards, what factor is critical for determining the design snow load on the array?
Answer: The ground snow load for the specific location.
The American Society of Civil Engineers (ASCE) 7 standard, "Minimum Design Loads for Buildings and Other Structures," is the basis for structural design requirements. The starting point for calculating roof snow loads is the ground snow load (pg), which is determined from maps based on historical climate data for the specific geographic location.
When attaching a flush-mounted racking system to a residential roof, what is the standard best practice for securing the L-feet or standoffs?
Answer: Using lag screws driven into the center of the roof rafters.
To ensure the structural integrity of the PV array and its ability to withstand wind and snow loads, the racking system must be securely anchored to the building's structure. The standard and required practice is to locate the roof rafters and drive lag screws through the roof decking and into the center of these structural members, providing a strong and reliable connection.
During a mechanical installation, an installer notices that removing a single PV module from the middle of a row will break the continuity of the equipment grounding conductor run along the rail. According to NEC and best practices, this installation is:
Answer: Non-compliant, because removing a module must not interrupt the bonding path for other modules.
NEC 690.43 and best practices require that the equipment grounding path for a PV array remains continuous. The connection method for the bonding jumpers or grounding clips must be arranged so that the removal of a single module does not interrupt the grounding continuity for any other modules in the array. This ensures the entire system remains safely grounded during maintenance.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- nabcep.org — Retake policy, score release, score validity, exam format, time limit, test delivery, test dates, retake fee · verified Oct 2026